15
cord or plug are damaged. In all these cases return the appliance to your
sales point or recognized after sales service.
• NEVER touch the control button, electrical power cord and plug with wet
hands. NEVER immerse the appliance, the power cord or the plug in
water (or any other liquid). They are only to be cleaned with a damp
cloth. In case the appliance does get wet or moist, immediately
disconnect the plug from the power socket.
• NEVER use separate timers or remote control systems.
• After use remove the plug from the electrical socket. Also remove the plug when the appliance is not in
use, when you clean the appliance or when you move it.
• Always put the appliance on a stable and flat underground, like a kitchen counter or a table so that it
cannot turn over or slide.
• Always place the appliance on a heat-resistant surface. A wooden surface always needs to be protected
against the heat of the appliance.
• In case an extension cord is used:
o Only use an extension cord with a diameter that is minimum equal to the diameter of the
appliances’ cord and an integrated earthed plug and that has a higher power than the
appliance.
o Take all necessary measures to prevent someone from tripping over the extension cord.
• NEVER let the cord hang over the edge of the table or the counter.
• NEVER place the appliance near heating sources like cookers, heating or oven.
• NEVER place the appliance and the power supply cord near water sources, such as a sink.
• NEVER cover the appliance when in use.
• Make sure there is a distance of minimum 30 cm between the appliance and the wall. Keep the
appliance away from inflammable goods, such as curtains, textile, paper,…
• Only use the appliance on the mains voltage as indicated on the id label.
• NEVER use the appliance without cheese or other food.
• Only use the original accessories.
BEFORE THE FIRST USE
• Remove all packaging and stickers. Keep packing material away from children.
• The appliance is not assembled. Assemble it as described under ‘Assemble the appliance’
• Clean the appliance as described under ‘Cleaning’.
• The appliance is ready for use.
ASSEMBLE THE APPLIANCE
• Slide the height regulator (10) over the support (6) and then put the support in the support opening (12)
on the base (14).
• Tightly fasten the screw (13) on the support.
• Slide the height regulator to the desired height and tightly fasten the screw (11) on the height regulator.
• Put the baking plate on top of the appliance (5).
• Put the cord in the connection (3)
• The appliance is ready for use.
