463948

Fritel co 1190 Manual

13
Zoom out
Zoom in
Previous page
1/20
Next page
13
BEFORE THE FIRST USE
- Check if the mains voltage of your appliance (230 Volt) corresponds with the mains voltage in your
home.
- Remove all packaging. Then clean the parts as described in ‘ Maintenance and cleaning’, before using
the appliance for the first time.
- Check the coffee maker on possible defects.
- Fill the water tank with water (see MAX water level on coffee jar) and let it run through. Repeat this a
few times.
USING THE COFFEE MAKER
- Fill the coffee jar with the desired quantity of water (NEVER exceed the MAX. water level). Open the
lid, pour in the water and close the lid.
- Open the filter holder. You can either use the nylon filter or use a paper filter (size 1x4)
- Add the desired quantity of coffee and close the filter holder.
- Place the coffee jar on the keep warm plate.
- Plug in the coffee maker. The LCD display now shows „12:00“ and „:“ will blink.
- Press the ON/AUTO/OFF button. The control lamp is now red. The coffee maker starts working.
- The coffee making process can be interrupted by pressing ON/AUTO/OFF twice. The control lamp is
now blue. After about 10 sec. the control lamp goes out.
- To restart the coffee maker, press ON/AUTO/OFF once. The control lamp is now red.
Tip: you can remove the coffee jar for pouring coffee at any time. Thanks to the anti drip function, the
coffee will stop dripping during about 30 seconds. After that, the coffee will continue running.
- After the coffee is ready and if you leave the coffee jar on the keep warm plate, the coffee will be kept
warm. After two hours, the coffee maker will switch off automatically if this is not done manually in the
meantime. For the best coffee aroma, it is recommended to drink the coffee right after it is made.
- Attention: fresh made coffee is very hot. Be careful not to get burned when pouring the coffee.
- If you are not using the coffee maker, switch it off and plug it out.
TIMER FUNCTION
If you wish to use the timer function, you can program your coffee maker as follows. i.e. it is now 17.10
and you wish the coffee maker to start at 20.15.
1) Press PROG. once. The LCD display shows „CLOCK“ in the top right corner.
2) Press HOUR and MIN until you have set the actual time (fig.1)
3) Press PROG. once. The LCD display shows „TIMER“ in the top left corner.
4) Press HOUR and MIN until you have set the desired start time (fig.2)
5) Press PROG. again until the words „CLOCK“ and „TIMER“ do not show on
the display anymore. The blue control lamp of the PROG. button will blink.
6) Press ON/AUTO/OFF twice. The blue control lamp will blink. On the LCD
display you will see the actual time. By pressing PROG. you will see the
delayed start time.
REMARK:
- Press ON/AUTO/OFF once to cancel the delayed start time.
- Press ON/AUTO/OFF twice to start the coffee making process right
away
- If you wish to modify the delayed start time, repeat steps 1-5
When the delayed start time is reached, the blue control lamp of the ON/AUTO/OFF button will not blink
anymore, but will turn red. The coffee maker now starts making coffee.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fritel co 1190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fritel co 1190 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info