Manual Fritel BM1807 (page 30 of 48) (English, Dutch)

447847

Zoom out

Zoom in

1/48

*3 Delayed start: do not use milk, cream, eggs, …

7. Starting a program

- Press the “START/STOP” button to start the baking process. Thetimer will count down.

- Adding extraingredients: for the programs 1,3,4,6 and 8 the appliance will emit a sound signal after +/- 20

min. to remind you toadd additional ingredients such as nuts, raisins, fruit…

ATTENTION: To add ingredients, never press STOP, because this will stop the entire baking process.

- The stage of the baking process and the selected program are memorized in case of an electricity breakdown

(max.15 min.), during ‘delayed start’ or during the warming process. If an electricity breakdown occurs after the

first kneading phase, the baking process will be stopped entirely since a good result cannot be obtained anymore.

ATTENTION: NEVER touch, block or cover the ventilation holes. This could cause smoke development if

the dough rises over the baking tin and touches the heating element. If there is smoke in the baking chamber

because the dough came in contact with the heating element, keep the lid closed to avoid flames or to putout

flames. Press the STOP button and pull out theplug. NEVER put out smouldering dough with water.

8. End of the baking process

At the end of the baking process you willhear different sound signals and the screen will display 0:00.

For most of the programs, the appliance will automatically start the‘keeping warm’ phase, and this during about 1 h.

NEVER let the baked bread longer than 1 h in the appliance after the end of the baking process, as the bread will

lose its crustiness. After 1 h the appliance will emit soundsignals every 5 min.

To remove bread, jam,dough from the appliance, first press the STOP button, remove the plug and open the lid. Use

oven gloves to remove the baking tin from the appliance and to remove the bread from the baking tin. Let the bread

cool off on a grid.

TIP: If necessary, remove the bread from the rim of the baking tin with a wooden spoon. Then turn over the baking

tin and slap gently on the bottomside ofthe baking tin to remove the bread.

Remove the kneading hooks by using the kneading hook remover. If the kneading hooks got stuck in the bread, only

try to remove them after the bread has completely cooled off. If the kneading hooks got stuck in the baking tin and

you cannot remove them, place the baking tin in warm water to let it soak and try again.

ATTENTION: You can start a new program immediately after the previous one. But it is possible that the LCD

screen displays E01 or E00 when you press START. This means that the appliance is still too hot (+55°C). If this

occurs, IMMEDIATELY press the STOP button, remove the baking tin with ingredients and let the appliance cool

off .

VI. CLEANING AND MAINTENANCE

-Switch offthe appliance, pull out the plug and let the appliance and accessories completely cool off before cleaning

them.

-The appliance itself can be cleaned with a damp cloth. NEVER immerse in water or any other liquid. The heating

element may NEVER come into contact with water or any other liquid.

-The kneading hook, baking tin with non-stick coating can be cleaned in warm water with detergent. Do NOT use

any abrasives to avoid damaging the non-stick coating. The baking tin, kneading hook, measuring spoon, measuring

cup, are NOT dishwasher proof.

-NEVER use scourers, aggressive cleaning products or liquids such as alcohol, petrol, acetone, … to clean the

appliance or parts of it.

-Let the appliance dry entirely before using it again.

-Store the appliance in a clean, dry and frost free place, out of reach of children. Never put heavy or hard objects on

top of it.

VII. TROUBLESHOOTING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fritel BM1807 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fritel BM1807 Manual

Product: