674528
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
ALWAYS mount the blade unit correct on the cup. ALWAYS use the seal.
NEVER pull the cord itself to pull the plug from the socket. NEVER use extension cords and ALWAYS unroll the
cord completely.
Don’t use parts or accessories from other appliances.
This appliance is only intended for blending, mixing or grinding food. The appliance may not be used for other
purposes.
Immediately unplug the appliance in case it shows a malfunction when in use.
Repairs can only be executed by a recognized expert or a recognized repair shop.
The appliance is intended for household use and cannot be used for more than 1 minute at a time.
REMARK: NEVER place the appliance on a wet surface or wet towel.
NEVER use liquids hotter than 60°C in the appliance.
NEVER switch on the appliance when it is empty.
The appliance is equipped with a safety against overheating. If it should heat whilst working it will shut off
immediately. Let the appliance cool down before reusing it.
2. BEFORE THE FIRST USE
Remove all packaging and stickers.
Keep all packaging out of reach of children.
Check if the mains voltage corresponds with the mains voltage in your home.
Before the first use we recommend to clean all components thoroughly (see ‘Cleaning’).
3. INSTRUCTIONS OF USE
A. BLENDING
The blade unit ‘blending’ is intended for the preparation of:
o Smoothies
o Shakes
o Juices
o Cold soups
o Dressings and sauces
o Baby food
Cut the fruit and vegetables in pieces.
TIP: small pieces tend to blend better and faster than large pieces.
Put the ingredients in the cup, add moist as needed (water, juice, milk,…).
Don’t fill up the cup for more than 2/3
rd
, otherwise there is no space for the ingredients to blend.
Turn the blade unit on the cup by turning clockwise.
Carefully fix the cup: put the cup with the blade unit on the motor unit with the 3 pins on the cup right on top of
the openings on the motor unit, softly push the cup down and turn clockwise until the pins are under the rim of
the motor unit.
Put the plug in the socket.
Push in the middle of the On/Off button for continuous work.
Push on the outer rim (upper under side) of the button for the pulse function.
The appliance blends the ingredients. The longer it is working, the finer the ingredients will be blend.
Once the ingredients are blend to taste:
Turn the appliance off by pushing on the On/Off button if you are working in continuous mode, or by
releasing the button if you are working in pulse mode.
Pull the plug from the socket.
Turn the cup counterclockwise until the pins are aligned with the openings in the motor unit.
Remove the cup with blade unit from the motor unit.
Turn over the cup and remove the blade unit.
Put on the desired lid:
o Use the lid with small openings
o Use the lid with large openings
o Use the lid without any opening
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fritel BG 1310 - Blend and Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fritel BG 1310 - Blend and Go in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info