Manual Frilec KOLN779BF-3 (page 56 of 61) (English, Dutch)

808990

Zoom out

Zoom in

1/61

There are ventilation holes around outside of the hob. YOU MUST ensure these holes are not blocked by the worktop when

you put the hob into position.

 Be aware that the glue that join the plastic or wooden material to the furniture, has to resist to

temperature not below 150℃, to avoid the unstuck of the paneling.

 The rear wall, adjacent and surrounding surfaces must therefore be able to withstand an

temperature of 90℃.

9.2 Before installing the hob, make sure that

 The work surface is square and level, and no structural members interfere with space requirements.

 The work surface is made of a heat-resistant and insulated material.

 If the hob is installed above an oven, the oven has a built-in cooling fan.

 The installation will comply with all clearance requirements and applicable standards and regulations.

 A suitable isolating switch providing full disconnection from the mains power supply is incorporated in the permanent

wiring, mounted and positioned to comply with the local wiring rules and regulations.

 The isolating switch must be of an approved type and provide a 3 mm air gap contact separation in all poles (or in all

active [phase] conductors if the local wiring rules allow for this variation of the requirements).

 The isolating switch will be easily accessible to the customer with the hob installed.

 You consult local building authorities and by-laws if in doubt regarding installation.

 You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces surrounding the hob.

9.3 After installing the hob, make sure that

 The power supply cable is not accessible through cupboard doors or drawers.

 There is adequate flow of fresh air from outside the cabinetry to the base of the hob.

 If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed below the base of

the hob.



The isolating switch is easily accessible by the customer.

9.4 Before locating the fixing brackets

The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls

protruding from the hob.

9.5 Adjusting the bracket position

Fix the hob on the work surface by screw 2 brackets on the bottom of hob(see picture) after installation.

Adjust the bracket position to suit for different table top thickness.

KÖLN779BF-3 Version ENG 5-2022 Page 20 of 24

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Frilec KOLN779BF-3 in the language / languages: English, Dutch as an attachment in your email.

The manual is 29.27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Frilec KOLN779BF-3 Manual

Product: