Manual Frigor VT308 (page 7 of 64) (English, German, Danish, French, Spanish)

671947

Zoom out

Zoom in

1/64

The items stored in the freezer and the

humidity of the surrounding air gradually

cause frost and ice to form inside the

freezer. A thin layer of frost or ice does

not affect freezer performance, but the

thicker the layer, the higher the energy

consumption. Small amounts of loose frost

can be removed using a plastic scraper.

Never use electrical apparatus or sharp

implements as these may damage the

inside of the appliance.

When the layer of frost and ice exceeds

4-5 mm the freezer should be completely

defrosted. It is recommended that defrosting

be performed when there are no or only a

few items stored in the freezer.

Proceed as follows:

1. Leave the freezer lid open.

2. Position the partition under the defrost

water drain.

3. Place a bowl of hot (but not boiling) water

in the freezer, close the lid and wait

approx. 30 minutes before removing

loose frost with the plastic scraper.

4. To prevent water from damaging the oor

during defrosting, it is advisable to check

the defrost water tray from time to time

and to cover the oor around the defrost

water drain to protect against ice and

splashes. When all the frost and ice have

melted, clean the inside of the appliance

using water with a mild, perfume-free

detergent. Dry the freezer with a soft

cloth.

5. Reconnect the power supply.

6. Return items to the freezer when the

required temperature has been reached.

Remember to reinsert the stopper in the

defrost water drain.

Defrosting

g. 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Frigor VT308 in the language / languages: English, German, Danish, French, Spanish as an attachment in your email.

The manual is 2,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Frigor VT308 Manual

Product: