5
OPERATING INSTRUCTIONS
Option Selections
High
By pressing the HIGH pad, the option is selected.
The dishwasher heats water in main wash to
approximately 140
0
F (60
0
C).
This increase in water temperature helps
dishwasher detergent remove food grease and soil
from dishes more effectively and aids in drying.
Air Dry
The AIR DRY option in combination with rinse aid
will enhance drying performance. AIR DRY option
is not available on all cycles.
Sanitize
To sanitize your dishes and glassware, select
SANITIZE option, by pressing SANITIZE pad.
When selected, the light will come on and remain
on until end of cycle. The water temperature in
the fi nal rinse will be raised to 155
o
F (68
o
C) and
will maintain that temperature for 9 minutes. This
option is available in Power Plus and Normal Wash
Cycles. Only these sanitization cycles have been
designed to meet NSF requirements.
The cycle time will be extended until the proper
water temperature is reached.
Washing action will
continue during the water heating delay. For best
results, the incoming water temperature should be
at least 120
o
F (49
o
C).
The sanitize criteria may not be satisfi ed if there is
an interruption of the cycle, power failure or if the
incoming water temperature is below 120
o
F (49
o
C).
Sanitize pad fl ashes at the end of the cycle if the
NSF requirements for sanitization are not reached.
To turn off the SANITIZE option, press the
SANITIZE pad. The SANITIZE light will turn off.
Spray
Press SPRAY pad to select this option. This varies
the pressure optimally for the cycle’s intended
normal use.
Scour
Press SCOUR pad to select this option. This
provides a very high “scour” pressure. Due
to wash cycle optimization, this option is not
selectable in all wash cycles.
SPRAY and SCOUR can not both be selected to run
together.
My Favorite Cycle
The MY FAVORITE CYCLE option allows you to
program your preferred cycle and options into one
button. Once Programmed, simply press the MY
FAVORITE CYCLE button followed by the START/
CANCEL pad will select the programmed cycle and
options.
To Program the MY FAVORITE CYCLE button:
1. Select your preferred cycle and options
2. Hold the MY FAVORITE CYCLE button for 3
seconds.
The LED over the MY FAVORITE pad turns on
indicating the MY FAVORITE CYCLE option has
been programmed. To change the MY FAVORITE
CYCLE option simply repeat steps one and two
above.
Delay Start
The DELAY START option allows you to
automatically delay starting your dishwasher from
1-24 hours.
To activate press the DELAY TIME pad until the
desired delay time shows in the STATUS window
and press START.
To cancel the DELAY START option and begin the
cycle before the delay period is over, press the
START/CANCEL pad until the status window show
cycle duration. Press START/CANCEL again and
close the door.
Child Lock Controls
To prevent children from accidentally changing
the dishwasher cycle or starting the dishwasher,
lock the dishwasher controls by pressing the AIR
DRY pad until the status window displays “loc”. To
unlock the controls, press the AIR DRY pad until
“loc” is no longer displayed in the status window.
To Cancel a Cycle
To cancel a cycle at anytime, open the door and
press the START/CANCEL pad until you hear a
tone. When the door is opened, the last cycle
selected will be displayed. If desired, a new cycle
can now be selected by pressing START/CANCEL
pad and upon closing the door the cycle will begin.
