Manual Frigidaire FGET2765KF (page 12 of 32) (English)

526988

Zoom out

Zoom in

1/32

SETTING OVEN CONTROLS

SETTING CONTINUOUS BAKE OR 6 HOUR

ENERGY SAVING

The TIMER and SELF CLEAN pads control the Continuous

Bake or 6 Hour Energy Saving features. The oven control has

a factory preset built-in 6 Hour Energy Saving feature that

will shut off the oven if the oven control is left on for more

than 6 hours. The oven can be programmed to override this

feature for Continuous Baking.

To set the control for Continuous Bake or 6 Hour

Energy Saving features

1. Press and hold TIMER for 6 seconds.

After 6 seconds “6Hr OFF” or “StAY On” will appear

in the display and the control will beep once.

2. Press SELF CLEAN to switch between the 6 Hour Energy

Saving and continuous bake features.

Note: “6Hr OFF” in the display indicates the control is set for

the 6 Hour Energy Saving mode and “StAY On” indicates

the control is set for the Continuous Bake feature.

3. Press START to accept the change (display will return to

time of day) or press CANCEL to reject the change.

SETTING TEMPERATURE DISPLAY —

FAHRENHEIT OR CELSIUS:

The BROIL and SELF CLEAN pads control the

Fahrenheit or Celsius temperature display modes. The

oven control can be programmed to display temperatures

in Fahrenheit or Celsius. The oven has been preset at the

factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or

Celsius to Fahrenheit

1. To tell if the display is set for Fahrenheit or Celsius

press BROIL and hold it for 6 seconds; “550°”

will appear and “BROIL” will ﬂ ash in the display

and a beep will sound. If “FAhrnht” appears, the

display is set to show temperatures in Fahrenheit.

If “CELSIUS” appears, the display is set to show

temperatures in Celsius.

2. Press SELF CLEAN to switch between Fahrenheit or

Celsius display modes. The display will show either

“FAhrnht” or “CELSIUS”.

3. Press START to accept the change or press CANCEL

to reject the change.

SETTING THE CLOCK

The SET CLOCK pad is used to set the clock. The clock may

be set for 12 or 24 hour time of day operation. The clock

has been preset at the factory for the 12 hour operation.

When the range is ﬁ rst plugged in, or when the power

supply to the range has been interrupted, the timer in the

display will ﬂ ash.

To set the clock (example below for 1:30)

1. Press SET CLOCK. “CLO” will appear in the display.

2. Press 1 3 0 pads to set the time of day to 1:30. “CLO”

will stay in the display.

3. Press START. “CLO” will disappear and the clock will

start.

CHANGING BETWEEN 12 OR 24 HOUR TIME

OF DAY DISPLAY

1. Press and hold SET CLOCK for 6 seconds. “CLO” will

appear in the display.

2. CONTINUE holding the pad until “12Hr dAY” or “24Hr

dAY” appears in the display and the control beeps

once.

3. Press SELF CLEAN to switch between the 12 and 24

hour time of day display. The display will show either

“12Hr dAY” or “24Hr dAY”.

4. Press START to accept the change or press CANCEL to

reject the change.

5. Reset the correct time as described in To set the Clock

above. Please note that if the 24 hour time of day mode

was chosen, the clock will now display time from 0:00

through 23:59 hours.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Frigidaire FGET2765KF in the language / languages: English as an attachment in your email.

The manual is 3,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frigidaire FGET2765KF

Frigidaire FGET2765KF Installation Guide - English - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Frigidaire FGET2765KF Manual

Product: