Manual Frigicoll WIFI USB 01 - Controller (page 3 of 20) (English)

771529

Zoom out

Zoom in

1/20

OWNER’S MANUAL

WiFi Controller

IMPORTANT NOTE:

Read the manual carefully before intalling or connecting

your Smart kit (Wireless module). Make sure to save this

manual for future reference.

WIFI USB 01

CONTENTS

1. SPECIFICATION ........................................................................................1

2. PRECAUTIONS ......................................................................................... 1

3. DOWNLOAD AND INSTALL APP .............................................................. 2

4. INSTALL THE SMART KIT ......................................................................... 3

5. USER REGISTRATION ............................................................................. 4

6. NETWORK CONFIGURATION ................................................................. 5

7. HOW TO USE APP .................................................................................. 12

8. SPECIAL FUNCTIONS ............................................................................ 14

DECLARATION OF CONFORMITY

Hereby, we declare that this Smart kit is in compliace with the essential

requirements and other relevant provisions of Directive 2014/53/EU.

A copy of the full DoC is attached. (European Union products only)

1. SPECIFICATION

Model WIFI USB 01

Standard IEEE 802.11 b/g/n

Antenna Type Printed PCB Antenna

Frequency WLAN 2400 ~ 2483.5 MHz

Maximum Transmitted Power 19.8 dBm Max..

Operation Temperature 0ºC~45ºC/32ºF~113ºF

Operation Humidity 10%~85%

Power Input DC 5 V/300 mA

2. PRECAUTIONS

• Applicable system: IOS, Android. (Suggest: IOS 8.0 or later, Android 4.0

or later)

Please keep you APP up to date with the latest version.

Due to special situation may be occurred, we explicitly claims below: Not

all of the Android and iOS system are compatible with APP. We will not

be responsible for any issue as a result of the incompatibility.

• Wireless safety strategy

Smart kit only support WPA-PSK/WPA2-PSK encryption and none

encryption. WPA-PSK/WPA2-PSK encryption is recommended.

CAUTION

• Due to different network situation, control process may return time-out

sometimes. If this situation occurs, the display between board and App

may not be the same, please do not feel confused.

• Smart Phone camera needs to be 5 million pixels or above to make sure

scan QR code well.

• Due to different network situation, sometimes, request time-out could

happen, thus, it is necessary to do network conguration again.

• The APP system is subjected to update without prior notice for product

function improvement. The actual network conguration process may be

slightly different from the manual, the actual process shall prevail.

• Please Check The Service Website For More Information.

3. DOWNLOAD AND INSTALL APP

Caution: The following QR Code is only available for downloading APP. It is

totally different with the QR code packed with SMART KIT.

Android iOS

• Android Phone users: scan Android QR code or go to Google Play,

search ‘NetHome Plus’ app and download it.

• iOS users: scan iOS QR code or go to APP Store, search ‘Nethome

Plus’ app and download it.

4. INSTALL THE SMART KIT (wireless module)

1 Remove the protective cap of the smart kit (wireless module)

2 Open the front panel and insert the smart kit (wireless module) into the

reserved interface.

3 Attach the QR code packed with Smart kit (wireless module) to the side

of the machine, ensure it is convenience to be scanned by the mobile

phone. Alternatively, user can take picture of the QR Code and save in

into their own phone.

WARNING: This interface is only compatible with SMART KIT (wireless

module) provided by the manufacturer.

Insert

5. USER REGISTRATION

• Please ensure your mobile device is connected to Wi router. Also,

the Wi router has already connected to Internet before doing user

registration and network conguration.

• It is better to log in your email box and active your registration account

by clicking link in case you forget the password.

1. Click “Sign up” 2. Enter your email address

and password, and then click

“Registration”,

6. NETWORK CONFIGURATION

CAUTIONS:

• It is necessary to forget any other around network and make sure

the Android or iOS device just connect to the Wireless network you

want to congure,

• Make sure the Android or iOS device Wireless function works

well and can be connected back to your original Wireless network

automatically.

Kindly reminder:

User must nish all the steps in 8 minutes after powering on air conditioner,

otherwise you need to power on it again

Using Android device to do network conguration:

1. Make sure your mobile device has already been connect to

the Wireless network which you want to use, Also, you need to

forget other irrelevant Wireless network in case it inuences your

conguration process.

2. Disconnect the power supply of air conditioner.

3. Connect the power supply of AC, and continuously press the “LED

DISPLAY” or “DO NOT DISTURB” button seven times in 10 seconds.

4. When the unit displays “AP”, it means that the air conditioner wireless

has already entered into “AP” Mode.

• Some type of air conditioner do not need the 2. step to be in AP.

5. Press “+ Add Device” 6. Select the appliance you

are setting upassword

and click “OK”.

7. Follow the above steps to enter “AP” mode

8. Choose the network

conguration

method

9. Choose the “Scan the

QR code” method

9. Or choose the “Manual

Setup” method

10. Please enter the

password

11. Network

conguration is

successful

12. Conguration Success,

you can see the device

on the list

Using iOS device to do network conguration:

1. Make sure your mobile device has already been connect to

the Wireless network which you want to use, Also, you need to

forget other irrelevant Wireless network in case it inuences your

conguration process.

2. Disconnect the power supply of AC (some units).

3. Connect the power supply of AC, and continuously press the “LED

DISPLAY” or “DO NOT DISTURB” button seven times in 10 seconds.

4. When the unit displays “AP”, it means that the air conditioner wireless

has already entered into “AP” Mode.

5. Press “+ Add Device” 6. Select the appliance you

are setting upassword and

click “OK”.

7. Follow the above steps to enter “AP” mode

8. Connect to the Wireless

network

9. Please enter password

10. Network conguration

is successful

11. Conguration Success,

you can see the device

on the list.

NOTE:

• When nishing network conguration, APP will display success cue

words on the screen.

• Due to different internet environment, it is possible that the device

status still display “ofine”. If this situation occurs, it is necessary to

pull and refresh the device list on the APP and make sure the device

status become “online”. Alternatively, user can turn off the AC power

and turn on it again, the device status will become “online” after few

minutes.

7. HOW TO USE APP

Please ensure both your mobile device and air conditioner are connected to

the Internet before using app to control the air conditioner via Internet, please

follow the next steps:

1. Click “Sign up” 2. Choose the air conditioner.

3. Thus, user can control air

conditioners on/off status,

operation mode, temperature, fan

speed and so on.

NOTE: Not all the function of the

APP is available on air conditioner.

For example: ECO, Turbo, Swing

function, please check the user

manual to nd more information.

8. SPECIAL FUNCTIONS

Including: Timer On, Timer Off, 8ºC Heat, Sleep, Check.

NOTE: If the air conditioner do not support the above function, the function will

be hided from the function list.

• Timer On / Timer Off

Weekly, user can make an appointment to turn on or off AC on specic time.

User also can choose circulation to keep the AC under schedule control every

week.

• 8ºC Heat

User can let the AC run under 8ºC Heat by one-click. When people go outside,

this function can protect your furniture from frost damage.

• Sleep

User can customize their own comfortable sleep by setting target temperature.

• Check

User can simply check the AC running status with this function. When nishing

this procedure, it can display the normal items, abnormal items, and detail

information.

• Share Device

The air conditioner can be controlled by multi-users at the same time by Share

Device function.

1. Click “Share device” 2. QR code display.

3. The other users must log in

‘Nethome Plus’ app rst, then

click “Add Share Device” on their

own mobile, then ask them to scan

the QR code.

4. Now the others can add the

shared device.

APP DECLARATION

FCC ID: 2AS2HMZNA19

IC : 24951-MZNA19

This debice complies with Part 15 of the FCC Rules and Industry Canada’s

licence-exempt RSSs.

Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may

cause undesired operation of the device

Only operate the device in accordance with the instructions supplied.

Changes or modications to this unit not expressly approced by the party

responsible for compliance could vois the user’s authority to operate the

equipment.

This device complies with FCC radiation exposure limits set forth for an

uncontrolled environment. In order to avoid the possibility of exceeding the

FCC radio frequency exposure limits, human proximity to the antenna shall

not be less than 20cm (8 inches) during normal operation.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measure:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Company will not be liable for any issues and problems caused by

Internet, Wireless Router and Smart Devices. Please contact the

original provider to get further help.

CS374U-APP(OEM)

16110800000349

20190516

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Frigicoll WIFI USB 01 - Controller in the language / languages: English as an attachment in your email.

The manual is 1.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frigicoll WIFI USB 01 - Controller

Frigicoll WIFI USB 01 - Controller User Manual - German - 20 pages

Frigicoll WIFI USB 01 - Controller User Manual - Dutch - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Frigicoll WIFI USB 01 - Controller Manual

Product: