363292
13
Zoom out
Zoom in
Previous page
1/28
Next page
DO YOU USE SOLID FAT?
Do not place the block of fat on the heating element. Melt the block of fat in
another receptacle and pour the melted fat into the fryer.
Should the block of fat come into contact with the element, the safety cutoff
will be triggered.Press the “reset” button (no. 10 on the detailed view).
When heating the fat, make certain to pierce one or more holes in it to help
it melt and to avoid little explosions.
TIPS FOR GREAT FRIES
1.Washthefriestwiceinhotwater.
2.Risethemincoldwater.
3.Drythefries.
4.Setthethermostatonthefryerto170°C.
5. Wait for the light to go out.
6.Slowlyimmersethefriesintheoilinthe
fryer.
7. When the light comes on again, remove
the fries from the fryer.
8. When the light goes out, place the
friesbackinfor4-5minutes.
9.Takethefriesoutagain.
10.Setthethermostatonthefryerto190°C.
11. Wait for the light to go out again.
12. Once the light is out, re-immerse the fries
for 1-2 minutes.
FOR BEST COOKING RESULTS, WE RECOMMEND USING
VANDEMOORTELE BRAND FRYER OIL
Our best advice for you :
•Leavethebasketemptyin
the basin during heating,
to prevent sudden cooling
on immersion.
•Fill your basket no more
than two-thirds full with
food.
•When heating solid fat,
make sure that several
small holes are pricked
init.Thiswill easecircu-
lation and prevent small
explosions.
•Checktheleveloftheoil
beforeusingit; toomuch
oil or fat will cause an
overow, too little inter-
feres with the cooking
process.
•Always immerse fresh or
frozen productsatahigh
temperature, then remove
then as soon as the indica-
tor light comes on. Then
follow the operating in-
structionsforcooking.
• Avoid immersing ice or
watertogether with food,
to prevent the danger of
burning splashes.
•Theelectricalcontrolpan-
el must not be immersed
in water or in any other
liquid.
•Disconnect the fryer from
the mains and allow it to
cool before moving it, so
that neither you or anyone
near risks being burnt.
11
en g l i s h
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FriFri 1938 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FriFri 1938 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info