Manual Friedland SA5 (page 8 of 52) (English)

613170

Zoom out

Zoom in

1/52

INTRODUCTION

SYSTEM HOUSE CODE

In order to prevent any unauthorised attempt to operate

or disarm your system, you must configure your system

to accept radio signals only from your own system

devices. This is done by setting a series of eight

miniature (DIP) switches in all devices (except the

Control Panel) to the same ON/OFF combination (the

House Code) selected by the user/installer. The Control

Panel is then programmed to operate only with devices

set to this House Code. All detectors and Remote

Control Unit(s) must be configured with the same House

Code in order for the system to operate correctly.

Inside the Siren, Detectors and Remote Control Unit is

a series of 8 DIP switches.

The House Code is set up by moving each of the 8

switches in each device to the same randomly

selected ON/OFF sequence. When setting the DIP

switches, ensure that each switch ‘clicks’ fully into

position. Use the tip of a ballpoint pen or a small

screwdriver to move each switch in turn.

SA56

Note: It is recommended that the system House

Code is always changed to a code other than the

factory setting.

e.g.

Switch 1

= set to ON

position

1 2 3 4 5 6 7 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Friedland SA5 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Friedland SA5 Manual

Product: