535711

Friedland HISK1 GlobalGuard Alarm System Manual

73
Zoom out
Zoom in
Previous page
1/78
Next page
73
TROUBLE SHOOTING
Symptom / Recommendation
Control Unit not working - Power LED OFF or
flashing.
1. Mains power failure - check if other electrical
circuits are operable.
2. Check that mains adaptor is plugged in and socket
is switched ON.
3. Check that DC jack plug from mains adaptor is
connected in Control Panel.
4. Check fuse /MCB in Consumer Unit on the circuit
serving the Control Panel.
Note: Before replacing any fuses or resetting the
MCB, the cause of the failure should be investigated
and rectified.
Control Unit event log LED flashing.
1. Check all PIR, Door/Window, Remote, Keypad and
Smoke Detectors for low battery indication, (i.e. LED
behind detection lens flashes when movement
detected). Renew batteries as required.
2. Check event log message for details of event
Control Unit not accepting User Access
Code.
1. Pause between key depressions too long. Do not
pause for more than 5 seconds between pressing
keys.
2. Incorrect code entered. Press before re-entering
correct code.
3. Reset to factory defaults and reprogram system.
Detection Zone triggered (LED flashing) but
no alarm is sounding.
1. Entry/Exit delay still running and not yet expired.
2. Alarm duration period has already expired and
system has reset.
3. Alarm duration programmed to ‘no alarm’.
Siren and Indicator LEDs operating but no
alarm at Control Panel.
1. Siren’s Tamper switch activated. Check security of
Siren fixing to wall and adjustment of anti-tamper
switch to ensure switch is fully depressed.
Siren not responding to Control Panel.
1. Ensure ‘ID Code’ of the Siren is learnt by the
Control Panel.
2. Ensure main Siren configuration switch is set to
SIREN.
3. Incorrect User Access Code being entered at
Control Panel.
4. Ensure Siren is within effective radio range of
Control Panel and equipment is not mounted close to
metal objects.
5. Siren rechargeable battery discharged
a. Clean Solar Panel.
b. Check age of rechargeable battery - replace if at
end of useful life.
c. Charge the rechargeable battery first for
approximately 4 hours if required
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland HISK1 GlobalGuard Alarm System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland HISK1 GlobalGuard Alarm System in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info