560834

Friedland GlobalGuard Home Alarm System Manual

18
Zoom out
Zoom in
Previous page
1/232
Next page
18
6.2.2.3 External siren (EXT. SIREN) – Wireless siren (WIREFREE SIREN)
You can enable and disable the external siren.
6.2.2.4 External siren (EXT. SIREN) – Night alarm (NIGHT ALARM)
You can prevent the control panel from initiating a full-alarm condition between 22:00 pm to 6:00 am to avoid the alarm sound
disturbing the neighbourhood. If the function is disabled, no alarm will sound between 22:00 pm to 6:00 am.
6.2.2.5 Error beep (ERROR BEEP)
If an abnormal condition has occurred, the event log indicator will flash and the control panel will emit an error beep.
If the event log indicator flashes while the system is disarmed and the control panel beeps periodically, this indicates an alarm
has occurred. Access the event log to make the event log indicator stop flashing and the control panel stop beeping.
Note: The control panel will not emit an error beep between 10:00 pm and 6:00 am.
6.2.2.6 Radio-frequency jamming detection (RF JAMMING DETECTION)
The radio-frequency jamming detection will continuously scan for radio-frequency jamming signals on the system operating
frequency.
6.2.2.7 Alarm relay (ALARM RELAY)
You can set the time for which the external hard-wired relay contacts will operate after an alarm has been triggered.
6.2.2.8 Zone lockout (ZONE LOCKOUT)
You can prevent a single zone from triggering an alarm more than three times before the system is disarmed.
6.2.2.9 Part arm-I setup (PART ARM-I SETUP)
You can set how long the exit delay expires when the system is armed as “Part Arm-I” mode.
6.2.2.10 Part arm-II setup (PART ARM-II SETUP)
You can set how long the exit delay expires when the system is armed as “Part Arm-II” mode.
6.2.2.11 Fully arm setup (FULLY ARM SETUP)
You can set how long the exit delay expires when the system is armed as “Fully Arm” mode.
6.2.2.12 Holiday arm setup (HOLIDAY ARM SETUP)
You can set how long the exit delay expires when the system is armed as “Holiday Arm” mode.
6.2.2.13 Date (DATE)
You can set the current date.
6.2.2.14 Time (TIME)
You can set the current time.
6.2.2.15 Remote keypad (WIREFREE KEYPAD)
The control panel can learn up to 6 remote keypads.
1. Learning the remote keypad (LEARNING ID)
a) Enter the 4-digit ID code and press the button on the remote keypad. The control panel emits two short beeps.
The display shows “NEW DEVICE”.
Note: If the remote control has already been linked, the control panel will emit one long beep.
b) Enter the 4-digit ID code and press the button on the remote keypad within 15 seconds to confirm the ID code.
The control panel emits three short beeps. The display shows “DEVICE CONFIRMED” > “SAVING NEW DEVICE”.
Note: If the confirmation signal is not received within 15 seconds, the control panel will emit one long beep and exit learn
mode.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland GlobalGuard Home Alarm System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland GlobalGuard Home Alarm System in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Friedland GlobalGuard Home Alarm System

Friedland GlobalGuard Home Alarm System Installation Guide - English, German, Dutch, French, Italian, Portuguese, Spanish - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info