560834

Friedland GlobalGuard Home Alarm System Manual

9
Zoom out
Zoom in
Previous page
1/232
Next page
9
1. Place a first door/window contact detector (zone 1) on the front door.
2. Place a second door/window contact detector (zone 2) on the back door.
3. Place a first PIR movement detector (zone 3) and a second PIR movement detector (zone 4) in two of the following
locations:
- downstairs in the living room containing most valuables
- on the landing covering the access routes between the bedrooms and the stairs
- in the hall covering the control panel and routes between downstairs rooms
5.2 Device range
The quoted range of the system devices is measured in ideal conditions. Any solid object placed between the transmitter and
the receiver will reduce the radio-frequency operating range. The amount by which the wireless range will reduce depends on
the obstruction between the transmitter and the receiver. The effect on the range of multiple walls is cumulative.
Wall type
Range reduction
Dry-lined partition wall
10-30%
Single-layer brick wall
20-40%
Double-layer brick wall
30-70%
Metal panel/radiator
90-100%
5.3 Installation order
1. Installing the solar siren (optional)
Refer to the Installation and Operation Manual. Refer to the Quick Installation Guide.
2. Installing the control panel
Refer to the section “Installing the control panel”.
3. Installing the IP gateway
Refer to the section “Installing the IP gateway”.
4. Installing the PIR movement detector (optional)
Refer to the Quick Installation Guide.
5. Installing the door/window contact detector (optional)
Refer to the Quick Installation Guide.
6. Installing the remote control (optional)
Refer to the Quick Installation Guide.
5.4 Installing the control panel
Note: If you use the solar siren as optional accessory, make sure that the solar siren is installed and its battery is fully charged
before installing the control panel.
1. Keep the control panel out of reach of young children.
2. Mount the control panel to a flat surface at a height between 1.5 and 2 metres. Make sure that the tamper switch is closed
when you mount the control panel to the wall.
3. Locate the control panel in a position out of sight of potential intruders, but easily accessible for system operation and
leaving and entering the house within the set alarm time.
4. Mount the control panel within a protected area so that potential intruder cannot reach the control panel without opening
a door or window protected by door/window contact detector a or passing through an area protected by a PIR movement
detector.
5. Locate the control panel such that the exit/entry tone can be heard from outside the property.
6. Make sure that the distance from the control panel to the wall socket does not exceed the length of the power supply
cable.
7. Make sure that the control panel is installed within effective radio range of the control panel and away from metal objects.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland GlobalGuard Home Alarm System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland GlobalGuard Home Alarm System in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Friedland GlobalGuard Home Alarm System

Friedland GlobalGuard Home Alarm System Installation Guide - English, German, Dutch, French, Italian, Portuguese, Spanish - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info