560832

Friedland FGGA05 Series Manual

8
Zoom out
Zoom in
Previous page
1/78
Next page
8
6 Wireless connection setup
6.1 Wireless connection (router without WPS button)
1. Log in to the website
https://GlobalGuard.Friedland.co.uk on your PC.
2. Click “Settings”.
3. Click “IP CAM Settings”.
4. Select the camera (1).
5. Select the Wi-Fi function (2).
6. Select the audio (3).
7. Enter the wireless security settings (4):
- Wireless Network: Enter the name of the
wireless network of the router (SSID).
- Security Type: Select “None”, “WEP” or
“WPA/WPA2-PSK”.
- WEP Mode: Select “64-bit (5 char)”, “64-bit
(10 hex)”, “128-bit (13 char)” or “128-bit (26 hex)”.
Enter the WEP key.
- WPA-PSK Mode: Select “TKIP” or “AES”. Enter
the WPA-PSK key.
Note: “WPA2-PSK” is also supported. “WPA
Enterprise” and “WPA2 Enterprise” are not supported.
8. Click “Apply” (5) to save the changes. Wait for
approximately one minute.
Note:
The IP camera must be connected to the same local
network as the IP gateway.
9. Disconnect the Ethernet cable from the camera to
start the wireless connection. The indicators on the
camera come on and go off alternately. Within one
minute, the indicators on the camera will go off and
the camera will restart.
If the wireless connection has been established, the
Ethernet connection indicator will flash and the
Internet connection indicator and the Micro SD card
indicator will light continuously.
Note:
- If you change the camera to another location, disconnect the power adaptor from the wall socket, move the camera to the
required location and connect the power adaptor to the wall socket again. If you move the camera much further away from
the wireless router, check the signal strength of the wireless connection using the signal strength meter on your PC or
smartphone as a guide.
- If you use the wired Ethernet connection, connect the Ethernet cable to camera again. If the wireless connection between
the camera and the router is poor, a wired connection may also be required.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland FGGA05 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland FGGA05 Series in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info