787183
9
Zoom out
Zoom in
Previous page
1/14
Next page
Climobile
9
EN
Trobleshooting
Do not repair or disassemble the AC by
yourself. Unqualied repair will lead to failure
of the warranty and may cause damage to
users or their properties.
Symptom Cause Action
The unit does not
work.
No electricity. Turn it on after connecting it to a
socket with electricity.
The overow indicator dispays ”FL”.
The inside water pan is full.
Empty the water pan.
The ambient temperature is too low or
too high?
Recommended at the temperature of
7-35 °C (44-95 °F).
In cooling mode, the room
temperature is lower than the set
temperature; in heating mode, the
room temperature is higher than the
set temperature.
Change the set temperature.
In dehumidication mode, the ambient
temperature is low
The AC is placed in a room with an
ambient temperature greater than
17 °C (62 °F).
The cooling or heat
effect is not good.
There is direct sunlight. Pull the curtain or put the unit in the
shadow.
Doors or windows are open; there are
a lot of people; or in cooling mode,
there are other sources of heat
Close doors and windows and add
new air conditioning.
The lter screen is dirty. Clean or replace the lter screen.
The air does not pass freely through
the unit.
Make sure the air inlet and outlet are
not obstructed.
Big noise The unit is not placed on a at surface. Put the unit on a at and hard surface
(to reduce noise).
The compressor does
not work.
Overheat protection is activated. Wait for 3 minutes until the
temperature is lowered, and then
restart.
The remote control
does not work.
The distance between the unit and the
remote control is too far.
Let the remote control get close to
the AC and make sure that the remote
control directly faces to the direction
of the remote control receiver.
The remote control is not aligned with
the direction of the remote control
receiver.
Batteries are dead. Change batteries.
Displays ”E1”
The vent hose temperature sensor is
not working.
Check the vent hose temperature
sensor and related electrical
connections.
Displays ”E2” The room temperature sensor is not
working.
Check the room temperature sensor
and related electrical connections.
If problems not listed in the table occur or
recommended solutions do not work, please
contact technical support.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frico Mobile Clim at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frico Mobile Clim in the language / languages: English as an attachment in your email.

The manual is 0.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info