787192
8
Zoom out
Zoom in
Previous page
1/9
Next page
Original instructions
Infrasmart IP67
IHS15W/B/G67
IHS20W/B/G67
.... 6
EN .... 9
SE .... 12
FR .... 15
DE .... 19
NO
.... 22
NL .... 26
ES .... 29
IT .... 32
PL .... 35
RU
.... 38
FI
Infrasmart IP67 - IHSxxx67
2
Dimensions
SE: Mottagning fjärrstyr: 120°
EN: Operation range of IR-remote: 120°
NO: Driftsområde for IR-fjernkontroll: 120°
DE: Betriebsbereich der IR-Fernsteuerung: 120°
RU: Радиус действия инфракрасного пульта дистанционного управления: 120°
FR: Angle de détection de la télécommande IR : 120°
ES: Radio de acción del mando a distancia por infrarrojos: 120°
NL: Bereik van de IR-afstandsbediening: 120°
PL: Zasięg działania pilota na podczerwień: 120°
IT: Intervallo operativo del telecomando IR: 120°
FI: IT-kaukosäätimen toimintaetäisyys: 120°
125
165
80
104
690
305
710
55
125
165
80
104
690
305
710
55
Operation range of
IR-remote: 120°
Infrasmart IP67- IHSxxx67
3
Positioning
Fig.1: The heaters should heat from at least
two directions for even heating
2–3,5 m
1,8–2,5 m
Installation height
SE: För jämn uppvärmning bör infrorna värma från minst två håll.
NO: For jevn oppvarming bør infraene varme fra minst to sider.
DE: Für eine gleichmäßige Wärmeleistung sollten die Strahler aus mindestens zwei Richtungen heizen.
RU: Приборы должны располагаться по крайней мере с двух сторон от человека.
FR : Pour un chauffage uniforme, les émetteurs doivent chauffer dans au moins deux directions.
ES: Para garantizar una calefacción uniforme, deben colocarse de modo que el calor llegue desde al menos
dos direcciones.
NL: De stralers moeten voor een gelijkmatige verwarming vanuit minimaal twee richtingen werken.
PL: Aby zapewnić równomierne ogrzewanie, ciepło powinno pochodzić co najmniej z dwóch kierunków.
IT: Per avere un riscaldamento uniforme, il calore deve provenire da almeno due direzioni.
FI: Tasaisen lämmityksen varmistamiseksi lämmittimien tulisi lämmittää vähintään kahdesta suunnasta.
Flammable material
Minimum mounting distance
SE: Minimiavstånd, Brännbart material
NO: Minsteavstand, Brennbart materiale
DE: Mindestabstand, Entflammbares Material
RU: Минимальные расстояния при установке,
Легковоспламеняемые материалы
FR: Distances minimales, Matériau inflammable
ES: Distancias mínimas, Material inflamable
NL: Minimale afstand, Brandbaar materiaal
PL: Minimalne odległości, Materiał łatwopalny
IT: Distanze minime, Materiali infiammabili
FI: Minimietäisyydet, Tulenarka materiaali
45° (+/- 10°)
1000
500
1000
1,5 kW: 150
2 kW: 200
1800
Infrasmart IP67 - IHSxxx67
4
Accessories
Remote control included
Controls
Frico Infra App
SE: Se separat manual.
NO: Se egen håndbok
DE: Siehe separates Handbuch.
RU: См. отдельную инструкцию.
FR: Consultez la notice associée
ES: Consulte el manual correspondi
NL: Zie aparte handleiding.
PL: Patrz oddzielna instrukcja.
IT: Vedere il manuale specifico.
FI: Katso erillinen käyttöohje.
SE: Fjärrkontroll ingår.
NO: Fjernkontroll følger med.
DE: Fernsteuerung im Lieferumfang enthalten
RU: Пульт ДУ в комплекте.
FR: Télécommande fournie
ES: Mando a distancia incluido
NL: Afstandsbediening meegeleverd
PL: Pilot w zestawie.
IT: Telecomando in dotazione
FI: Mukana kaukosäädin 5-portaista säätöä varten.
92865 KLS1KS
92852 BCSF9010 RAL9010
92853 BCSF9005 RAL9005
92854 BCSF7016 RAL7016
92848 BCDF209010 RAL9010
92849 BCDF209005 RAL9005
92850 BCDF207016 RAL7016
16975 IHXH*
16976 IHXL*
92862 MB40402009010 RAL9010
92863 MB40402009005 RAL9005
92864 MB40402007016 RAL7016
153370 IHG1500SL 1500W
153371 IHG2000SL 2000W
*) See separate manual.
IHXH IHXL
KLS1KS BCSF BCDF
MB4040200
Infrasmart IP67- IHSxxx67
5
Infrasmart IP67
Item
number
Type Heat
output
[W]
Voltage
[V]
Amperage
[A]
Colour
Max. filament
temperature
[°C]
Length
[mm]
Weight
[kg]
92800 IHS15W67 1500 230V~ 6,5 White 1800 710 2,5
92801 IHS15B67 1500 230V~ 6,5 Black 1800 710 2,5
92802 IHS15G67 1500 230V~ 6,5 Grey 1800 710 2,5
92803 IHS20W67 2000 230V~ 8,7 White 1800 710 2,5
92804 IHS20B67 2000 230V~ 8,7 Black 1800 710 2,5
92805 IHS20G67 2000 230V~ 8,7 Grey 1800 710 2,5
Technical specifications
IHS15/20W67 (RAL9010) IHS15/20B67 (RAL9005) IHS15/20G67 (RAL7016)
EN: Heat output
SE: Värmeeffekt
NO: Varmeeffekt
DE: Heizleistung
RU: Тепловая мощность
FR: Puissance
ES: Potencia calorífica
NL: Verwarmingscapaciteit
PL: Moc grzewcza
I T: Potenza termica
FI: Lämmitys teho
EN: Voltage
SE: Spänning
NO: Spenning
DE: Spannung
RU: Напряжение
FR: Tension
ES: Tensión
NL: Voltage
PL: Napięcie
IT: Tensione
FI: Jännite
EN: Amperage
SE: Ström
NO: Strøm
DE: Stromstärke
RU: Сила тока
FR: Intensité
ES: Intensidad
NL: Stroomsterkte
PL: Natężenie prądu
IT: Corrente
FI: Virta
EN: Max. filament temperature
SE: Maximal glödtrådstemperatur
NO: Maksimal glødetrådtemperatur
DE: Max. Heizfadentemperatur
RU: Maкс. t нити накала
FR: Température max. du filament
ES: Temperatura máx. del filamento
NL: Max. gloeidraadtemperatuur
PL: Maks. temperatura żarnika
IT: Temperatura max. filamento
FI: Suurin hehkulangan lämpötila
EN: Length
SE: Längd
NO: Lengde
DE: Länge
RU: Длина
FR: Longueur
ES: Longitud
NL: Lengte
PL: Długosc
IT: Lunghezza
FI: Pituus
EN: Weight
SE: Vikt
NO: Vekt
DE: Gewicht
RU: Вес
FR: Poids
ES: Peso
NL: Gewicht
PL: Masa
IT: Peso
FI: Paino
Infrasmart IP67 - IHSxxx67
6
EN
Installation and operating instructions
Positioning
The heaters must be placed so that they
cover the area to be heated, see fig. 1. The
normal mounting height is 2–3 metres above
the ground/floor. A rule of thumb for infrared
heaters is that 600–800 W/m² increases the
experienced temperature by about 10 °C. The
output demand can be reduced if the area to
be heated is protected. If the area only has a
roof, at least 800 W/m² should be installed.
600 W/m² is sufficient if the area has three
walls. For enclosed areas, the output demand
must be calculated. Optimum comfort is
achieved if the heat is distributed from at
least two directions.
Mounting
IHS is installed horizontally on walls with
supplied bracket. For other mounting
alternatives, e.g. in the ceiling, on a floor
stand, under a parasol or awning, see
accessories. For minimum distances, see
diagrams on introductory pages.
Replacing the lamp
The heat lamp is of the highest quality and
unless it is subjected to mechanical strains in
the form of vibrations and impact it will last
for a long time. The service life is dependent
on the ambient temperature and how the
heater is installed. When the heater is
installed freely and outdoors the temperature
will be low and the life of the lamp longer.
The lamp must be replaced by an installer
or other skilled person.
1. Disconnect the power supply.
2. Wait until the unit is cold.
3. Check that the replacement lamp has the
correct output and voltage.
4. Fit the new lamp. Note do not touch the
lamp with your fingers, wear gloves or the
like.
5. The protective tube must be refitted to the
cables, so that the cables are not damaged
when the grille is fitted.
6. Reassemble the unit again.
General Instructions
Read these instructions carefully before
installation and use. Keep this manual for
future reference.
The product may only be used as set out in
the assembly and operating instructions. The
guarantee is only valid if the product is used
in the manner intended and in accordance
with the instructions.
Application
Infrasmart is a compact, halogen infrared
heater which can be controlled via an app,
remote control (included), or built-in push-
button.
The Frico Infra app is available for both iOS
and Android. It has a range of up to 50 m and
can control up to 8 infrared heaters.
Infrasmart is available in several IP classes
and colours. They are suitable for balconies,
outdoor areas and terraces.
Start-up
When the unit is used for the first time or
after a long period of disuse, smoke or odour
may result from dust or dirt that has collected
on the element. This is completely normal
and disappears after a short time.
Connection
IHS is equipped with a 1.9 metre cord with
plug for connection to an earthed outlet
socket. The connection cord must not rest
against the unit as the surface becomes hot or
can be hit by thermal radiation. Contact an
electrician if the cord needs to be changed.
As the halogen lamp has a high starting
current the wall socket should be fuse
protected by a slow burn fuse.
In the event of uncertainty contact an
electrician.
Infrasmart IP67 - IHSxxx67
7
EN
Maintenance
The power supply to the unit must be
disconnected during all service, repair and
maintenance work.
The unit has no moving parts so the
maintenance requirement is small, but it
must be kept clean and free from dust and
dirt. If the reflector is not clean the thermal
radiation from the unit will decrease and the
heater will become hotter. A large amount of
dirt can cause overheating.
The surface of the reflector is sensitive and
must be cleaned with care. If the reflector
is dirty it must be cleaned or replaced by a
specialist.
Residual current circuit breaker
When the installation is protected by means
of a residual current circuit breaker, which
trips when the appliance is connected,
this may be due to moisture in the heating
element. When an appliance containing a
heater element has not been used for a long
period or stored in a damp environment,
moisture can enter the element.
This should not be seen as a fault, but is
simply rectified by connecting the appliance
to the main supply via a socket without a
safety cut-out, so that the moisture can be
eliminated from the element. The drying
time can vary from a few hours to a few days.
As a preventive measure, the unit should
occasionally be run for a short time when it is
not being used for extended periods of time.
Packaging
Packaging materials are chosen with
consideration to environment and are
therefore recyclable.
Handling of product at end of working life
This product may contain substances
necessary for functionality of product but
potentially dangerous for the environment.
The product should not be disposed
mixed with general household waste but
delivered to a designated collection point for
environmental recycling. Please contact local
authority for further details of your nearest
designated collection point.
Safety
For all installations of electrically heated
products should a residual current circuit
breaker 300 mA for fire protection be used.
The unit must not be fully or partially
covered as overheating can result in a fire
risk!
The unit must not be placed directly under
fixed wall sockets!
The unit must not be used if the unit or the
cord is damaged. Risk of injury!
The heater is equipped with a protective
grille to prevent contact or to prevent
large objects from touching the hot lamp.
The unit must not be used without this
protective grille.
The cable and plug must not be placed
inside the hot radiant area.
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made by
children without supervision.
Children of less than 3 years should be kept
away unless continuously supervised.
Children aged from 3 years and less than 8
years shall only switch on/off the appliance
provided that it has been placed or
installed in its intended normal operating
position and they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
Children aged from 3 years and less
than 8 years shall not plug in, regulate
and clean the appliance or perform user
maintenance.
CAUTION — Some parts of this product can
become very hot and cause burns. Particular
attention has to be given where children and
vulnerable people are present.
BLUETOOTH GEBRAUCHSANWEISUNG
Sie können eine kostenlose Bluetooth App für Ihren
Strahler für Ihr Iphone, ihr Ipad oder ihr Androidget
herunterladen. Mit der Burda Perfectclime App können Sie
bis zu acht Heizstrahler einzeln steuern. Zu den Funktionen
gehören:
An-und Ausschalten des Strahlers
rmedimmung von 25% bis 100%
Timer mit Ausschaltfunktion
Passwortgeschütze Verbindung zu den
Heizstrahlern
Individuelle Heizstrahlerbenennung und
Kontrolle
Um die App herunterzuladen suchen Sie nachBurda
Perfectclime in ihrem App Store oder Google Play Store
und fügen Sie die Heizstrahler hinzu.
ZURÜCKSETZEN
- Dcken Sie kurz auf den Knopf auf der rechten
Seite des Strahlers, um die Stärke der rme
einzustellen ( Leicht, Mittel, Stark und Aus)
GEBRAUCHSANWEISUNG FERNBEDIENUNG
-Dcken Sie mind. vier Sekunden lange den Knopf
auf der rechten Seite des Strahlers, um die
Einstellungen des Strahlers zurückzusetzen.
Knopf
Bild
Beschreibung
Pfeil oben
rmeleistung erhöhen
Max
Diermeleistung geht direkt auf
höchste Stufe gestellt
Pfeil unten
rmeleisung reduzieren
On
Der Strahler wird eingeschaltet. Der
Heizstrahler hat eine Softstartfunktion
(33%). Nach vier Sekunden nachdem Sie
den Strahler eingeschaltet haben, wird der
Strahler auf die letzt benutze
rmeleistung gehen. Bei Erstnutzung
geht der Strahler auf 100%.
Off
Der Strahler wird ausgeschaltet.
Bitte beachten Sie
Benutzen Sie zwei Batterien AAA 1.5V für die Fernbedienung. Sollten Sie den Strahler für eine
längere Zeit nicht nutzen, entfernen Sie die Batterien von der Fernbedienung, um eine längeren
Lebensdauer der Batterien zu gewährleisten.
Wählen Sie die gleichen Batterien beim Austausch der Batterien, sonst funktioniert die
Fernbedienung nicht
Bei fehlender oder nicht vorhandener Fernbedienung kann der Heizstrahler, ausschlilich der
Fernbedienungsoption, weiterhin genutzt werden. Bitte kontaktieren Sie den Kundendienst, wenn
Sie Hilfe brauchen.
Die Fernbedienungsfunktion könnte beeinträchtigt sein, wenn etwas zwischen der Fernbedienung
und dem Strahler ist.
Tauschen Sie die Batterien ordnungsgemäß aus, um die normale Funktion des Heizstrahlers nicht
zu beeinträchtigen.
Infrasmart IP67 - IHSxxx67
8
EN
Bluetooth - Frico Infra app
The Frico Infra app is available for both iOS
and Android. It has a range of up to 50 m and
can control up to 8 infrared heaters. Each
heater is individually managed and controlled.
Download ”Frico Infra” from App store or
Google Play and add the heaters to your
device.
Control functions include:
On/Off
Stepless control of the heat output 25-100 %
Timer with automatic shut off
Password protected connection to the
heaters
Individual control and identification/
addresses of the heaters.
Remote control
Remote control included, for regulation in 5 steps. The range is up to 7 m with a free line of sight.
Control
Infrasmart is controlled via an app, the
included remote control, or the built-in push
button.
The heater will switch to the highest heat output.
Increase heat output one step.
Decrease heat output one step.
Switch off the heater.
The heater switches to standby mode (the receiver indicator lights up).
Switch on the heater.
max
off
on
Built-in control and factory reset
Infrasmart is equipped with a push-button
control.
The heat output is regulated in 4 steps
(Low, Medium, High, Off).
To restore factory settings, press the button
for at least 4 seconds.
Use 2 x AAA size 1.5V batteries for the
remote control. Remove batteries when not
in use for an extended period in order to
preserve battery life.
Always use the same type of batteries when
changing them.
The heater can still be used should you
mislay the remote control or it is found to
be faulty (but without remote function).
The remote control may not function should
there be a loss of signal between the remote
control and the heater.
2020-04-27 CH
Main offi ce
Frico AB Tel: +46 31 336 86 00
Industrivägen 41
SE-433 61 Sävedalen mailbox@frico.se
Sweden www.frico.net
For latest updated information and information
about your local contact: www.frico.net.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frico Infrasmart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frico Infrasmart in the language / languages: English as an attachment in your email.

The manual is 0.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frico Infrasmart

Frico Infrasmart User Manual - German - 10 pages

Frico Infrasmart User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info