664132
28
Zoom out
Zoom in
Previous page
1/48
Next page
28
Do not remove wheel bolts with the wheel inflated.
Maintain pneumatic tyres at the recommended tyre pressure
found in this manual under 'Technical Specifications'
Failure to observe this warning may result in personal injury.
To remove a rear wheel from your Scooter
for the service of a tyre or tube carry out the following
instructions
1. Using a suitable body stand, lift the side of the vehicle
you wish to service off the ground. Place the stand
under the metal chassis. Care must be taken when lifting
heavy loads, you may need a friend to help you.
Care should also be taken when working on a
stand.
2. by removing the
valve core from the valve with a suitable valve key
( purchased from auto shops ).
Please note the rims of your wheel are a split
two part rim system,
Failure to observe this warning could put you in a
dangerous situation.
3. With the aid of two 13mm spanners (not supplied)
remove the 8mm wheel nuts and bolts from the wheel
rims and centre hub (see fig 35).
4. Side the wheel rims complete with the tyre from the
hub. Pull the two rims apart to expose the tyre and
tube.
5. Replace tyre and tube as necessary. Reassemble
components in reverse order.
Please be safe. Do not lift by the plastic
bodywork.
Freerider
(only competent people should carry out this
procedure).
TYRE SERVICING REAR WHEEL
Warning:
Warning:
Deflate the air from the wheel assembly
do not dismantle the wheel from
the hub without first letting the air out of the tyre.
TYRE SERVICING REAR WHEEL
Warning:
Warning:
Please
be safe. Do not lift by the plastic
bodywork.
Freerider
(only
competent people should carry out this
procedure).
FIG 34
the transmission as this will contaminate the original
lubrication and will invalidate your guarantee.
For your own safety, we recommend that you
check the function of your Scooter brakes prior to a journey.
If the motor brake is functioning correctly
and the drive is engaged you will not be able to push your
machine when it is switched off. Or switched on with the
speed control lever in the 'zero speed', central position.
When you drive your Scooter and
you let go of the speed control lever your Scooter
should reduce speed
Take care when lifting the transmission, keep
well away from clothing. It is normal to find a light film
of lubrication around this part.
Safety Note:
If your machine can be pushed as described
above, the motor brake could be faulty. Please do not
use, contact your local Freerider distributor.
Note: Check the Freewheeling Instructions on page 12
of this manual.
Freerider
very quickly. If you notice a change in
the normal slowing/braking condition, and your Scooter
and it does not slow down quickly,
Check the condition of your tyres regularly. Look for signs
of wear, cuts and foreign objects lodged in the tread.
Maintain the tyre pressures at all times; failure to comply
with this can lead to poor performance of your machine and
could make your machine unsafe and/or unstable. Tyres
should be replaced when the tread is worn to 0.5mm.
Your is designed with 'split' wheel rims.
please do not use your
machine, contact your Freerider distributor.
Freerider
Caution:
MOTOR BRAKES
Motor Brake:
DRIVING BRAKE
Warning:
MANUAL EMERGENCY BRAKE
Warning:
Warning:
Caution:
Warning:
TYRES
The manually operated 'Emergency Brake' is designed to be
operated only in the case of mechanical or electronic failure
to the motor and driving brakes, previously mentioned, See
pages 11& 12 figs 13 & 14 for operating instructions.
On no account operate this brake in conjunction
with the electronic motor brakes. Failure to observe this
instruction may cause damage or premature wear to the
motor and transmission system.
The manual brake system can be adjusted for wear to the
braking material by adjusting the operating cable length
adjustment nut (see fig 34).
Brake adjustment should only be carried out by a
competent engineer, failure to observe this warning could
put the brakes in an unbalanced state and may cause
damage to you or your Scooter.
Caution:
MOTOR
BRAKES
Motor
Brake:
Warning:
DRIVING
BRAKE
Warning:
Take
care when lifting the transmission, keep
well
away from clothing. It is normal to find a light film
of
lubrication around this part.
Safety
Note:
If
your machine can be pushed as described
above,
the motor brake could be faulty. Please do not
use,
contact your local Freerider distributor.
Note:
Check the Freewheeling Instructions on page 12
of
this manual.
Freerider
please do not use your
machine,
contact your Freerider distributor.
MANUAL
EMERGENCY BRAKE
Caution:
Warning:
TYRES
Warning: Freerider
FIG 35
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Freerider FR510DXXsb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Freerider FR510DXXsb in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info