664126
31
Zoom out
Zoom in
Previous page
1/49
Next page
5. Clean paintwork with auto shampoo. DO NOT use a high pressure hose. Wax painted and
bright metal parts.
SIX MONTHS Check and adjust as necessary:
1.
2.
3.
4.
5.
Tyre wear, replace as necessary (minimum tread 0.5mm).
All fasteners and ttings for sound function
Tension of handle bar lock and hinge bolt
Battery connections
Inspect all electrical plugs and sockets for damage and good contact and t.
Lubricate the following:
1.
2.
3.
4.
5.
Wig-wag accelerator lever pivot point.
Spray metal parts with moisture repellent (WD40).
Seat lock lever pivot bolt.
Seat arm hinges.
Inspect, lubricate and adjust upper handle bar steering bearings.
ANNUALLY Check the following and adjust as necessary:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Motor carbon brush wear (minimum brush length 8mm).
Front wheel bearings for wear.
Chassis for sound welds.
Rear Drive wheel hub key.
All wheel bolts.
Drive axle securing nuts.
Motor mounting bolts.
Magnetic motor brake disc and function.
Manual brake shoe lining wear.
Main control box electrical connections.
Main wiring loom for damage.
All steering components.
Clean chassis and repaint any exposed parts.
Lubricate on/off power key barrel with light oil.
Replace any damaged axle seals.
Cycle test charger for full operation function.
Cycle test batteries for operating capacity (This test can be performed by your local dealer).
LUBRICATION
Use a general purpose light lubricating oil on moving parts. All wheel bearings are
factory sealed and should not normally need lubricating.
Your drive axle is factory filled with a special lubricant and will not normally need
replacing.
Please note: These service intervals are a guide, more frequent use of your scooter may
require adjustment to these suggested intervals.
Caution: DO NOT mix other lubricants with this factory fitted drive axle lubricant.
Failure to observe this caution will invalidate your guarantee.
30
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Freerider 510GDX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Freerider 510GDX in the language / languages: English as an attachment in your email.

The manual is 8,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info