664126
16
Zoom out
Zoom in
Previous page
1/49
Next page
FREEWHEELING YOUR SCOOTER
If for the reasons of convenience, you require to push your scooter for a short distance, the drive
system can be put into "freewheel mode". This will allow your scooter to roll freely.
1. Freewheel Procedure:
The freewheel device is a red lever located at the rear right hand side of your scooter.To freewheel
your rst switch off the power switch located on the control console. Pull up the black lever until
a distinct click is felt. You can now push your with ease. Please note, in this mode withthe power
switch in the off position, the braking safety system is automatically activated when the scooter
is pushed quicker than walking speed, this is an automatic "run away" safety checking system, it
also reduces the risk of casual theft.
By switching on the console power switch at this stage you will introduce some heavy motor
braking, you will note that nine bars on the console battery gauge are ashing. This indicates that
your is in a freewheel mode and you cannot drive your scooter. Note, the quicker you push your
scooter the heavier the brake will be applied.
To re-engage the drive system, simply push down the brake until a distinct click is felt, switch the
power switch on your console off and then on, the battery gauge light will be fully illuminated
and you will be able to drive your scooter once again.
Warning: DO NOT sit on your scooter with the freewheel device in the disengage
position. Your scooter will not drive in this mode , the bar status light on your console
will ash nine bars.
Warning: If your scooter is in the freewheel mode when you turn on your power key
switch and depress your speed forward-reverse lever, you will not be able to move
under motor power, Dismount and re-engage the drive system by pushing the red
freewheel lever down.
Remount your scooter, switch the power
switch off and on again until the battery
gauge fully illuminates, your scooter
will now drive under motor power again.
Warning: ALWAYS check that
the freewheel device is in the drive
position before attempting to drive
your scooter after it has been left
unattended for a period of time.
Failure to observe this warning may result in an accident.
General Note: If you are able to push your scooter the drive system is disconnected.
DO NOT attempt to drive your scooter. Please check once again the afore mentioned
procedure for re-engaging the drive.
Warning: If your batteries are disconnected from your
scooter there will be no brake function in the freewheel
mode. DO NOT leave your scooter unattended in this
situation as it could roll away causing damage to other
parties or property. ALWAYS re-engage the drive system
when left unattended.
15
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Freerider 510GDX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Freerider 510GDX in the language / languages: English as an attachment in your email.

The manual is 8,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info