Manual Franklin MWD520 (page 28 of 41) (English)

17152

Zoom out

Zoom in

1/41

Using a Password

You can use a password to keep the information in the

databank private. The password is requested when the

unit is turned on and the databank is accessed.

Password Warnings

Warning! After you set the password, you must enter the

password to access the databank for the first time during

a session. Always record your password and keep it in a

separate place.

If you forget the password, you must reset the unit to

access the databank. Warning! Resetting the unit erases

all user-entered information. Always keep written copies

of your data.

If you do not have a reset button located on the back of

your unit, remove the batteries, wait at least two minutes,

and then re-install them. For battery instructions, see

“Replacing the Battery”.

If you have a reset button, use the end of a straightened

paper clip to gently press the reset button.

If the unit does not reset after pressing the reset button,

follow the above instructions for removing the batteries.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Franklin MWD520 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Franklin MWD520 Manual

Product: