694553

Franke FSW 918 TC W WH XS-CH SWING Manual

7
Zoom out
Zoom in
Previous page
1/14
Next page
EN
1
18
Fitting the Hood canopy
• Adjust the two screws Vr, in the brackets 11a, so that they are at
the start of their travel (B).
• Hook the hood body to the two brackets 11a.
• Connect the Hood to the Mains Power Supply, inserting a
bipolar switch with a contact aperture of at least 3mm.
• Open the top panel. (See the paragraph on USE)
• Open the Bottom Door by pulling it downwards with your
hands.
• Remove the Metal Grease Filters using the handles provided.
• From the inside of the hood body, turn screws Vr to level the
hood body itself.
Warning: should the rear wall not be completely flat and cause the
two glass panels not to be aligned, pls turn on the two knobs in the
lower part inside the hood body until you reach the perfect alignment
of the two glass panels.
• Fasten the safety screw 11.
• Replace the Metal Grease Filters, then shut the top panel. (See
the paragraph on USE)
• Disconnect the hood from the mains power supply.
Warning: Should the door encounter an obstacle while opening or
closing it will block. When the obstacle is removed and the button is
pressed again the door will open.
Warning: In the event of a malfunction, check the fuse.
(B)
11a
Vr
11
Replacing the fuser
• The fuser is placed up on the right side. Turn the fuser holder
as indicated. Replace the fuser with one having the same fea-
tures.
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid
pipe ø 150 mm, the choice of which is left to the installer.
• Fix the pipe in position using sufficient pipe clamps (not sup-
plied).
• Remove any activated charcoal filters.
ø 150
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Franke FSW 918 TC W WH XS-CH SWING at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Franke FSW 918 TC W WH XS-CH SWING in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info