Manual Francisfrancis Y 1.1 Touch (page 22 of 112) (English, German, Dutch, Danish, French, Italian, Spanish)

720138

Zoom out

Zoom in

1/112

Now you can start descaling:

1) Switch the machine on.

2) Press the

button within

15 seconds of switching on the

machine and hold it for 7 sec-

onds until a beep is heard.

3) The button will begin

ﬂ ashing.

4) Press the

button again within 5 seconds and the ma-

chine will emit a beep.

5) The

button light will remaing on.

6) Press the

button within 5 seconds.

The machine will now start to dispense the water and descal-

ing solution.

WARNING:

If the operations are not performed in the times indicated,

the machine will not start the descaling process: therefo-

re, switch the machine off and repeat steps 1 through to 6.

The

button ﬂ ashes alternately for about 10 minutes during

the process.

The

remains permanently on after the water and descal-

ing solution has ﬁ nished.

Now proceed with the rinsing cycle to eliminate any resi-

dual descaling product:

Remove the water tank “L”,

and empty the residual water

with descaling product.

Rinse it out thoroughly under

running water and ﬁ ll it with

fresh drinking water.

WARNING: Do not reuse the water and descaling solution,

dispensed in container “W” during the descaling process,

for the rinse phase.

Fit the tank “L” back in the

machine until it is inserted cor-

rectly in place.

Empty the container “W” and

place it back under the brew

group “C”.

DESCALING

The formation of limescale is a natural consequence of using

of the machine.

Descaling allows to optimise cleaning and removing scale de-

posits from the inside.

WARNING:

If the descaling is not performed the limescale can cause

malfunctions not covered by the warranty.

Use descaling products that are not excessively aggressive.

To descale the machine you can use any commercially avail-

able non-toxic descaling product for coffee machines.

Use the descaling product supplied with the machine to

descale for the ﬁ rst time.

The need to run the descaling cycle is indicated by the dim-

ming of the

and buttons every 10 seconds.

To descale the machine, proceed as follows:

Make sure that the main switch “M” is positioned to “0”.

Check that there are no capsules in the capsule compartment

“B “.

Remove the water tank “L” and empty the residual water.

Fill the tank with 0.7 litres of

fresh drinking water.

Add the descaling product

and wait for it to dissolve (stir

to make the product dissolve

faster).

Fit the tank “L” back in the machine until it is inserted correctly

in place.

Place a container “W” with a

capacity of at least 1 litre be-

neath the brew group “C”.

Min.1 liter

Start

Min.1 liter

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Francisfrancis Y 1.1 Touch in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 5,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Francisfrancis Y 1.1 Touch Manual

Product: