529168

Francisfrancis X7.1 Manual

19
Zoom out
Zoom in
Previous page
1/112
Next page
19
EN
- Insert the capsule holder in the brew head; turn the handle
to the right until it locks into place.
- Check that the coffee button is lit.
- Press and release the coffee button ; the machine will
brew the programmed quantity of coffee. To stop the fl ow in
advance, press the button again.
To make other coffees, remove the used capsule and repeat
the above steps.
Warning:
- The capsules are single-dose and cannot be used to
make two coffees.
- To ensure greater safety, the machine automatically
stops fl ow after approximately one minute.
- Remember to empty and clean the drip tray frequently.
SETTING THE QUANTITY OF
COFFEE IN A CUP
The X7.1 machine allows you to brew the desired quantity of
coffee in two modes: automatic and manual.
AUTOMATIC MODE - to set and memorise the quantity of cof-
fee to be brewed, carry out the following steps:
- Insert a capsule into the capsule holder and then fi t the latter
to the brew head.
- Place a cup beneath the capsule holder.
- Press the coffee button and keep it pressed until the coffee
has reached the desired level. Release the button. The ma-
chine is now programmed.
MANUAL MODE - to set the machine to work in the manual
mode, carry out the following steps:
- Insert a capsule into the capsule holder and then fi t the latter
to the brew head.
- Place a cup beneath the capsule holder.
- Press the coffee button and keep it pressed until the ma-
chine automatically stops dispensing coffee. Release the
button. In this case the programming has been cancelled.
Note: in the automatic mode it is also possible to make coffee
using the manual procedure.
- Press the coffee button for about 3 seconds;
- Press the coffee button again to stop the fl ow;
- In this manner you will not change the quantity of coffee
initially programmed.
Note: when the machine is set for MANUAL MODE of the quan-
tity of coffee, after you start brewing it will be necessary to
press the coffee button again when the coffee has reached the
desired level in the cup in order to stop the fl ow.
PREPARING CAPPUCCINO
The machine features a steam wand for frothing the amount of
milk necessary to prepare one or more cappuccinos.
Prepare one or more cups of coffee following the instructions
in the previous section.
Froth the milk as follows:
Press the steam button ; the
steam icon in the central circle will
light up to signal that the machine
is getting ready to dispense steam.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Francisfrancis X7.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Francisfrancis X7.1 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 15,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info