581180
42
Zoom out
Zoom in
Previous page
1/64
Next page
Frama Matrix F4 / F6
42
5.6.3. Cleaning printing system
From time to time, it might become necessary for the print-
ing head jets to be cleaned. Your Frama franking system
provides a cleaning cycle for this purpose.
Blocked jets are often the result of the mains electric supply being switched off before the
jets have been properly sealed. As a matter of principle, use the log-off function so that
your franking system switches off properly.
You should clean the system if white lines show in
the franking mark. For this job, two cleaning pro-
grams are available:.
Nozzle Cleaning: A normal printing head cleaning
operation is carried out. The printing head and the
jets are cleaned.
Nozzle Cleaning + : This operation uses a great
deal of ink because the jets are flushed and cleaned
thoroughly.
To fetch the required program, press the appropri-
ate key. The cleaning program starts automatically. It is advisable to run the function “Nozzle Test” after-
wards to check how satisfactory the cleaning operation was.
5.6.4. Nozzle Test
A nozzle test is
incorporated in your
Frama Matrix franking
system.
In this test, each individual nozzle in the printing head can be activated. This
enables you to easily localize defective or blocked nozzles, and also to deter-
mine the scope of the cleaning program
Press the key “Nozzle Test”.
Introduce an envelope or something similar into the system for franking. A test
franking mark is made.
Check whether all lines have been printed. If not, let the printing head be cleaned.
5.6.5. Franking mark resolution
By pressing the key “Print Res.”, you can shift to the other of the two resolution modes. The following
then applies:
Print Resolution OPTIMAL: HQ franking mode for stiff demands. This mode consumes more ink than
the normal mode.
Print Resolution NORMAL: Franking mode with standard resolution. Basis for calculating the service life
of the inkjet cassette.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama Matrix F4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama Matrix F4 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frama Matrix F4

Frama Matrix F4 User Manual - German - 64 pages

Frama Matrix F4 User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info