581180
19
Zoom out
Zoom in
Previous page
1/64
Next page
Frama Matrix F4 / F6
19
3.2. Setting franking mark
If you have put the new cartridge properly into place, you can now press
“Yes” on the display.
The inkjet cassette will now be tested and calibrated. This process might take a
few seconds. During calibration, the display shown oppposite will appear.
If the inkjet cassette being used was already in place in your Matrix franking
system, you can choose between recalibration and taking over the existing
calibration data. Recalibration can be necessary if the initial calibration did not
result in a satisfactory franking mark, e.g. the printing head was too cold, etc.
After calibration, you will be asked to print a test franking mark. Pick up an envelope or a folded A4 sheet
of paper. We recommend that you use a filled envelope.
Lay the envelope / paper to be franked on the manual feeder MF4 or in the
automatic feeder AF6.
The envelope / paper, etc. will be franked with a test mark and ejected to the
left.
This is how the test mark should look
:
On the left hand side, you can see setting X
and on the right-hand side setting Y. The
setting valid at the time is indicated by an
arrow. The arrows should point where the
lines appear to be “straightest”.
If this is already the case, you only need to confirm the following X and Y displays by pressing the ENTER
key. Sometimes however, it is necessary for you to change the setting to optimize the results. Simply carry
out the additional instructions.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama Matrix F4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama Matrix F4 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frama Matrix F4

Frama Matrix F4 User Manual - German - 64 pages

Frama Matrix F4 User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info