581180

Frama Matrix F4 Manual

3
Zoom out
Zoom in
Previous page
1/64
Next page
Frama Matrix F4 / F6
3
General information / safety precautions
Thank you for deciding in favour of purchasing the innovative franking system Frama F4 or Frama Matrix F6.
The following information in this operating guide is intended as support when you install and operate your Frama
Matrix franking system. It also shows how you can easily make settings yourself. With this in mind, please first read
this guide before you put your franking system into service.
Modem approval
In accordance with the Commission Decision 1999/303/EC, this unit has been approved throughout Europe for con-
nection as single terminal equipment to the public telephone network. In view of the differences existing between the
public telephone networks of various countries, this approval in itself does not provide an absolute guarantee of
proper functioning of the unit at every network terminal point.
If any problems arise during operation, please first contact your supplier or maintenance provider.
Safety precautions / accident prevention
1. Read the operating guide completely and adhere to the instructions in it.
2. Before starting the franking machine the first time, it must be properly registered with the post office. When
doing so, keep to the instructions given by your local Frama sales organization.
3.
Each franking mark may be used only once. The Post Office regards repeated use as a punishable offence and a
violation of the general terms and conditions of business.
4. Test franking marks or sample franking impressions are not regarded as valid by the Post Office and items
bearing them may not, therefore, be mailed.
5. Inkjet cassettes and similar printing consumables must be regularly renewed and / or serviced to ensure high-
quality printing.
6. The use of fibrous and other unsuitable envelopes can result in blurred or smeared marks and thus to illegibility
of the franking mark. In view of this, the use of envelopes of this kind cannot be agreed to.
7.
In buildings in which the franking system is plugged into the power supply network a current overload protector
must be fitted.
8.
Before installing the system, check the cable (supply cord) and plug. Have damage repaired only by an elctrical
specialist.
9. Insert the plug into a mains socket only when the franking machine housing is closed.
10. Always run the mains cable (power cord) away at the back of the franking machine and make sure that no risk
exists of it being damaged or someone tripping over it.
11. Never pull the plug out of the socket by the mains cable (power cord).
12.
Never hold any foreign objects in the printing unit (risk of damage).
13.
Never put your hand into the printing unit. Your fingers could be injured if the franking machine is switched on.
Be careful if you are wearing long hair, a tie, etc.
14. Please remove the inkjet cassette if you have to transport the franking system somewhere.
15. Keep children away from the franking system.
16. Have franking machine repairs carried out only by a technician from your local Frama sales organization. Never
open the franking system yourself under any circumstances.
17. Always pull out the mains plug before opening the housing.
18. Never put any hot objects (cigarettes, etc.) onto the housing. Make sure that no moisture can infiltrate into the
machine or the power supply unit.
19.
Avoid using aggressive cleaning agents or detergents when cleaning the franking system. Instead, use a slightly
damp cleaning cloth.
20.
Keep fingers and other parts of the body as well as ties, necklaces, bracelets, long hair and open sleeves away
from the feed entry section. There is a risk of injury from moving parts.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama Matrix F4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama Matrix F4 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frama Matrix F4

Frama Matrix F4 User Manual - German - 64 pages

Frama Matrix F4 User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info