581182
35
Zoom out
Zoom in
Previous page
1/58
Next page
Frama Matrix F22
35
5.6.2. Nozzle cleaning
White lines in the print mark or lines missing from the nozzle test print mean that the print head
must be cleaned to restore the print quality.
Information
Blocked nozzles are often the result of the electric supply being disconnected before the
nozzles could be properly sealed. Always use the system shut-down function to switch off your
franking system reliably.
Two cleaning programmes are available to you for cleaning the nozzles:
Nozzle cleaning: A normal print head cleaning operation is run. The print head and the nozzles are
cleaned.
Thorough cleaning of nozzles: Intense rinsing and cleaning of the nozzles and print head.
To call up the required program, press the corresponding button. The cleaning program starts au-
tomatically. It is recommended that afterwards you perform the "Nozzle test" function to check that
the cleaning was successful.
Tip!
If you have heavily clogged nozzles which you cannot get clean with the "Clean nozzle" func-
tion, instead use a liquid print head cleaner* or alternatively distilled or demineralised water:
1. Remove the ink jet cassette. To do so, use the Change Print Head function (see further
below, Chapter 5.6.3. Changing the ink jet cassette).
2. Moisten a lint-free cloth or a paper-based cleaning cloth with print head cleaner or with
water.
3. Wipe the the print head slowly over the moistened cloth. Repeat this procedure until two
continuous blue lines become visible.
4. Avoid shaking the ink jet cassette; doing so could destroy it.
5. Clean the contacts on the cassette with a cloth. Use only undliuted alcohol or print head
cleaning fluid. NEVER use water!
6. Re-insert the ink jet cassette and follow the instructions on Page 30 to adjust it.
7. If the printed impressions are still not satisfactory, please contact our Customer Support
Department.
* can be purchased in the FramaShop (www.framashop.co.uk)
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama Matrix F22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama Matrix F22 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frama Matrix F22

Frama Matrix F22 User Manual - German - 64 pages

Frama Matrix F22 User Manual - Dutch - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info