581179
39
Zoom out
Zoom in
Previous page
1/45
Next page
Frama Matrix F2
39
9. Display messages and technical data
In the event of a malfunction, a message will appear in the display of your Frama Matrix F2. If you are
unable to eliminate the trouble yourself, you can obtain support on your Frama hotline or from your
local Frama dealer. In this case, keep your Licence Identifier Number ready at hand.
9.1. FramaOnline2 messages
Display message
Cause
Elimination
Modem malfunction:
The installed modem couldn’t be
initialized properly.
Switch the franking system off and
then on, and try to initialize it again. If
the error cannot be eliminated, contact
us on the Frama hotline.
Wrong activation code
You didn’t enter the FramaOnline2
activation code correctly.
Repeat the procedure. Enter the
FramaOnline2 activation code carefully.
No
telephone number
The telephone number required for
dialling the modem is missing.
Enter the required telephone number.
Please refer to page 12 in this respect.
Occupied
All modem ports of the
FramaOnline2 server are occupied.
Try again later. You mig
ht have to
preselect an exchange code because
many telephone systems acknowledge
an incomplete telephone number with
an engaged tone.
No connection
The FramaOnline2 data centre
doesn’t answer.
Try again. Check your telephone cable
connection and that the modem
settings are correct for calling the
exchange.
Connection interruption
Try again.
Your existing connection with the
FramaOnline2 data centre was
suddenly terminated.
Try again. Perhaps wait a few minutes
and then try again.
No dialling
tone
No dialling tone can be identified.
Check that the telephone cable is
plugged in properly.
Inspection required
You system must be connected with
the FramaOnline2 service at least
every 30 days to exchange data.
Select “Inspection“ to allow a
connection to be made between your
Frama Matrix F2 and the FramaOnline2
service.
Your franking system has been put
out of service.
Your system was signed off and is
now barred.
Contact your FramaOnline2 data
centre.
Franking system locked
The fra
nking system cannot continue
to frank because a data record
required for franking wasn’t updated.
Select “Inspection“ to allow a
connection to be made between your
Frama Matrix F2 and the FramaOnline2
service. The data record will be
updated during the inspection.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama Matrix F2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama Matrix F2 in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frama Matrix F2

Frama Matrix F2 User Manual - German - 40 pages

Frama Matrix F2 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info