669064
33
Zoom out
Zoom in
Previous page
1/52
Next page
Frama Matrix F12
33
5.6. Printer Settings
Information
1. Do not frank mail items thicker than 10 mm. You risk allowing the printing head to touch the
surface of the mail item and thus smearing the franked mark. You should therefore always use
Frama Matrix F12 franking labels for thick letters and packets.
2. Please make sure that no sharp objects, such as paper clips, are near the franking zone. This can
damage the print head.
3. Do not use very absorbent or fibrous envelopes which could prevent a cleanly printed mark. This
could invalidate your franking.
4. The use of coloured envelopes which offer insufficient contrast with the franking mark is not
permitted.
5. After a certain time the printing head is sealed to prevent the individual nozzles from drying. Do
not, therefore, switch the franking system off immediately, but wait until the print head is
sealed, or use the Log off button.
6. Please run a print head test and clean the print head using the Nozzle Cleaning function should
you have the impression that there are lines missing from the franked mark.
7. Always use the functions from the Printer Settings menu. Replacing the print head without
adjusting the alignment and testing from the Printer Settings menu can lead to inadequate
quality of the franking mark.
The Printer Settings menu gives you access to the options and functions required for perfect printing. The
functions in the Printer Settings menu are described in sequence below.
5.6.1. Nozzle test
A franking mark test is incorporated in your Frama Matrix F12
franking system.
This test activates each individual nozzle in the printing head.
This enables you to easily locate defective nozzles, and also to
determine the scope of the cleaning programme.
Press the Nozzle Test key and insert an envelope or
similar into the system.
A test franking mark is made. Check whether all
lines have printed. Run nozzle cleaning if necessary.
5.6.2. Nozzle cleaning
Whi
te lines in the print mark or lines missing from the nozzle test print mean that the print head must be
cleaned to restore the print quality.
Information
Blocked nozzles are often the result of the electric supply being disconnected before the nozzles
could be properly sealed. Always use the system shut-down function to switch off your franking
system reliably.
Two cleaning programmes are available to you for cleaning the nozzles:
Nozzle cleaning: A no
rmal print head cleaning operation is run. The print head and the nozzles are
cleaned.
Nozz
le cleaning +: Intensive flushing and cleaning of the nozzles and the print head.
Press the appropriate key to call up the programme you need. The cleaning programme starts automati-
cally. It is advisable to run the Nozzle Test function afterwards to check how satisfactory the cleaning op-
eration was.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama MATRIX F12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama MATRIX F12 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frama MATRIX F12

Frama MATRIX F12 User Manual - German - 58 pages

Frama MATRIX F12 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info