669065
47
Zoom out
Zoom in
Previous page
1/57
Next page
Frama Matrix F10 / F12
47
10. Troubleshooting/Error messages
In the event of a malfunction, a message will appear in the display of your Frama Matrix F10 / F12
franking system. If you are unable to eliminate the problem yourself, you can obtain support on
your Frama hotline or from your local Frama dealer. Keep your customer number and franking sys-
tem number ready to hand.
The Frama Matrix F10 / F12 franking system distinguishes two types of error message:
Information Messages marked with this label indicate a malfunction in the system that can be rem-
edied by the user (paper jam etc.) or are of a purely informative nature.
Caution! Messages marked with this label indicate a malfunction in the system. Switch the system
off and then on again. If the message remains, consult the Frama Service organisation.
Information messages, causes and how to remedy them are described below.
10.1. FramaOnline2
Display message
Cause
Remedy
Welcome.
Installation required.
See Operating manual.
Your Frama Matrix F10 / F12
franking system has not yet
been registered with the
FramaOnline2 service.
Run the installation as described in
section 2 (page 12).
Connection interrupted.
Your existing connection
with the FramaOnline2 data
centre was suddenly termi-
nated.
Try again. Perhaps wait a few minutes
and then try again. Run an inspection
loading.
Franking system locked.
Your system has been locked
or unregistered.
System will soon be locked.
Perform inspection?
Your Frama Matrix F10 / F12
franking system must deliver
consumption data to
FramaOnline2 for forwarding
to the Royal Mail. This mes-
sage appears five days be-
fore the franking system is
locked.
Run an inspection loading.
Franking system is locked.
Perform inspection?
Your Frama Matrix F10 / F12
franking system cannot con-
tinue to frank because a data
record required for franking
was not updated.
Select Inspection to allow a connection
to be made with the FramaOnline2
service. The data record will be up-
dated during inspection.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama MATRIX F10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama MATRIX F10 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info