669065
42
Zoom out
Zoom in
Previous page
1/57
Next page
Frama Matrix F10 / F12
42
8. Admin mode
Settings made in Admin mode always apply to all cost centres. In Admin mode you also have ac-
cess to all cost centres and can thus conveniently make settings for these cost centres (counter
readings, name and PIN). The additional features demanded by Admin mode are described below
(see section 7.1. Setup 1 menu (CC and Admin) on page 39 there are for instructions on calling up
Admin mode).
Tip
You can also make settings in each cost centre. However, when you do this not all the Admin
mode functions is available to you.
8.1. Main Menu
You are taken to the Main Menu after logging in. Franking is not possible in Admin mode. The Ad-
min functions in the Main Menu are described below.
8.1.1. Devices
8.1.1.1. Scales (optional)
There are no special features in Admin mode.
8.1.2. Logo
Specify the logo setting system-wide (to do this, in the Setup 3 menu, activate the Logo: System
function).
The other functions in the Logo menu do not differ from the descriptions from page 29.
8.1.3. Info Print
A list of all the cost centres can be printed out using the
Report CC key in Admin mode. All other reports and print
options correspond to the descriptions given earlier in
this operating manual (see section 5.5. Info Print from
page 34).
8.1.4. Printer settings
The Printer Settings menu item does not offer any additional functions in the Admin menu.
Tip
Only those settings that you have defined as SYSTEM in the Setup 3 menu, such as the logo,
can be adjusted.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama MATRIX F10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama MATRIX F10 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info