628403
7
Zoom out
Zoom in
Previous page
1/20
Next page
7
OSD MANAGEMENT
Advanced settings are available by joystick on the cable
Up
Move up / increase values
Down
Move down / decrease values
Left
Open sub-menu
Right
Close sub-menu
Enter
Enter menu and confirm selection
Setup item Description
LENS
Manual Lens & Auto Iris Lens Setting
MANUAL
This function is for normal lens or vari-focal lens like this camera serie.
AUTO
System automatically adjusts the iris level to control the brightness. This function is valid only for Auto Iris lens and
not available with this camera series.
SHUTTER / AGC
Shutter speed & AGC setting, it determines the image brightness under low lux or bright condition
AUTO
Mode and brightness setting of the HIGH / LOW LUMINANCE
MANUAL
Parameter of the mode, shutter and AGC
WHITE BAL
White balance mode setting, it determines the way the color is produced
ANTI CR
Color Rolling suppress
MANUAL
Manually adjust the white balance
PUSH LOCK
Press OSD ENTER button to lock the current white balance, once it is locked, the white balance will not operate even
when light temperature is changed.
ATW
Auto Trace White
PUSH
Similar to ATW, but system will force to track white balance continuously
USER1
User define white balance #1
USER2
User define white balance #2
BACKLIGHT
Backlight setting
OFF
Default Setting
BLC
Back light compensation
HLC
High light compensation
PICT ADJUST
Basic image adjustment such as hue, saturation, contrast, sharpness
MIRROR
ON/OFF, Flip image horizontally
BRIGHTNESS
0-255, Brightness (Default: 0)
CONTRAST
0-255, Contrast (Default: 128)
SHARPNESS
0-255, Sharpness (Default: 128)
HUE
0-255, Color Hue (Default: 102 for NTSC, 108 for PAL)
GAIN
0-255, Color Saturation (Default: 128)
ATR
Adaptive tone reproduction, software WD setting
MOTION DET
Motion detect function, sense area, sensitivity setting
PRIVACY
Privacy mask, color, transparency setting
DAY / NIGHT
Color / Mono / Auto Mode setting
AUTO
Auto Mode
COLOR
Color mode
B/W
Black and White mode
NR
Noise Reduction setting
NR MODE
Noise reduction mode adjustment
Y LEVEL
Luminance noise reduction (Default: 4)
C LEVEL
Color noise reduction (Default: 4)
CAMERA ID
Camera ID Setting
CHR1/CHR2
Default characters and User define characters (maximum of 40)
←→↑↓
Move the location of the cursors
CLR
Clear the highlight character & move to next character
POS
Use OSD UP/DOWN/LEFT/RIGHT button to adjust the ID locations
LANGUAGE
OSD Language Setting, total of 8 languages available
CAMERA RESET
Reset OSD setting
EXIT
Leave OSD Menu
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fracarro CIR700-922 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fracarro CIR700-922 in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info