628407
13
Zoom out
Zoom in
Previous page
1/48
Next page
13
Electric
network
input
230Vca
Feeder connection
Output voltage regulation trimmer.
DON’T TOUCH.
5.4 Electric safety warnings
• Thebuilding’selectricalinstallationmusttasuitablemagneto-thermalswitchtoprotectitfrom
surges and short circuits.
• Thebuilding’selectricalinstallationmusttasuitableomnipolarswitch.Theswitchmustbe
easy to access and have a separation from the contacts of at least 3 mm. The unipolar sectioning
device can be used to section the phase conductor if you are certain of having identified the
neutral conductor.
• Theconnectionconductorstothepowersupplynetworkandtheinternalharnessmustbexed
with clamps or similar fixing items.
• Fuseidentication:
Fusibile F300: F 3.15A.
6. FIRST SWITCHING ON OF THE CE2N-416 CONTROL UNIT
In this phase, we recommend not connecting the wires to the “+V_INT SIR” terminal and “+ REF”
terminal in order to prevent the activation of the indoor and outdoor sirens.
Remember to connect the siren controls when the programming and testing are over.
Startup the control unit
1. Connect the battery
2. Connect the 230V network voltage
The control unit starts the startup procedure; all the alarm outputs will be activated and the keypad
buzzer will start ringing to signal Tamper alarms, if any:
3. Enter the MASTER code (by default 1111111)
4. Press the “X” key to stop the alarms
After the alarm signalizations are stopped:
5. Enter the INSTALLER code (by default 0000000)
6. Begin programming.
7. CE2N-416 CONTROL UNIT PROGRAMMING
7.1 Programming keys
ATTENTION : from any point of the programming menu, use the
keys to scroll along the menu
by the key, you select an item while by the key, you exit the menu or return to the
previous menu. These rules are valid for all menus.
13.8Vcc output
Control unit
power supply
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fracarro CE2N-416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fracarro CE2N-416 in the language / languages: English as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info