779802
15
Zoom out
Zoom in
Previous page
1/28
Next page
EN
ASSEMBLY AND ADJUSTMENT
SAW BLADE TENSION (Fig. 1 - 6)
WARNING:
IF YOU DON'T USE THE BANDSAW FOR A LONG PERIOD, LOOSEN THE SAW BLADE.
REMEMBER TO CHECK SAW BLADE TENSION BEFORE USING THE MACHINE AGAIN.
WARNING:
IF SAW BLADE TENSION IS TOO TIGHTENED, IT CAN BREAK, WHILE IF IT IS TOO
LOOSEN, THE SAW BLADE CAN DROP OFF THE WHEEL AND STOP.
Note: Saw blade tensioning must be adjusted according to the different width of the blades, in order to
obtain a correct centering, a good performance and a suitable lifetime.
a. Disconnnect the machine.
b. In order to check saw blade tension (26) Fig.2, push the saw blade sideways, in the middle betweek the
workbench and the upper blade guide (11) Fig.1: the blade mustn't move more than 1-2 mm.
If necessary, correct saw blade tension:
- by turning saw blade tension adjustment knob (9) Fig.1 clockwise to tighten saw blade.
- by turning saw blade tension adjustment knob (9) Fig.1 anti-clockwise to loosen saw blade.
SAW BLADE ADJUSTMENT
WARNING:
BEFORE SAW BLADE ADJUSTMENT, MAKE SURE THAT SAW BLADE TENSION IS
CORRECT.
a. Open the door (12) Fig.1 by turning the fasteners (13) Fig.1. with a suitable screwdriver.
b. Turn slowly the upper saw blade wheel (8) Fig.1 clockwise. The blade must rotate in the middle of upper
and lower wheel rubber coatings (3) Fig.1. When the blade is not centered in the rubber coatings, saw blade
wheels angle must be adjusted. Knob (22) Fig.2 allows to modify upper wheel angle. By modifying wheel
angle, the blade rotates in the middle of wheel rubber coatings:
Rotate knob (22) Fig.2 clockwise to move the saw blade backwards.
Rotate knob (22) Fig.2 anticlockwise to move the saw blade forward.
It is necessary to rotate upper wheel repeatedly in order that upper wheel (8) Fig.1 adjustment makes the saw
blade change its position in the lower wheel (7) Fig.1.
After finishing this operation, lock the adjustment of upper wheel (8) Fig.1 angle by tightening the plastic locking
lever (14) Fig.2 located on the adjustment knob (22) Fig.2. Then, close the doors (12) Fig.1 by locking the
fastneres (13) Fig.1.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fox F28-182A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fox F28-182A in the language / languages: English as an attachment in your email.

The manual is 1.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info