743691
67
Zoom out
Zoom in
Previous page
1/75
Next page
65
(1) Please DO NOT forget to set the alarm schedule, the alarm schedule is red.
(2) Please make sure your camera time is correct.
(3) Please DO NOT forget to set the alarm area, the detected area is covered by the red grids. Or for
some models you can setup 3 detection zones in total.
6.1.7 Camera is not displaying image
Camera unable to show live image on web browser cloud be caused by multiple factors.
(1) Plugin is not installed or running properly.
Please install plugin first, go to IE Browser > Tool > Internet Option > Security > Custom Level >
ActiveX control and Plug-ins. Three options of front should be set to be Enable, The ActiveX programs
read by the computer will be stored. As follows:
Enable: Download unsigned ActiveX controls.
Enable: Initialize and script ActiveX controls not marked as safe.
Enable: Run ActiveX controls and plug-ins.
(2) Low network bandwidth that’s unable to transfer image. Please lower resolution of the camera.
(3) IR-cut is stuck at night when IR lights are on. In this case, manually turn off and on IR lights a few
times.
(4) Also, if camera’s firmware is too old that doesn’t support the browser and unable to install plugin will
cause the same issue. Please update firmware of the camera to latest first.
6.1.8 Unable to connect camera remotely using Foscam app
Foscam P2P cameras allow users to connect camera remotely using Foscam app without extract setup
like port forwarding. When it unable to connect remotely, below tips can help app establish the
connection:
(1) Update app and camera’s firmware to latest version,
(2) Power off the camera then power back on,
(3) Delete camera from app then re-add it back, also lower camera’s resolution.
6.1.9 Camera is added by others
When use myfoscam.com cloud or Foscam app, one camera can only be added to one account at the
same time. To solve error “This camera has already been added by another account” when add camera
to Foscam app or cloud, please send a clear photo of camera’s model sticker to Foscam support email
support@foscam.com to unbind it.
More FAQs are available here:
https://www.foscam.com/faqs/index.html
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam R4S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam R4S in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info