679380
69
Zoom out
Zoom in
Previous page
1/86
Next page
67
6 Appendix
6.1 Frequently Asked Questions
NOTE: Any questions you would meet, please check Network connections firstly. Check the working
status revealed by the indicators on the network server, hub, and exchange. If abnormal, check the
network connections.
6.1.1 Equipment search tool cannot find the camera
After power on camera and connect it to router by Ethernet cable, open Equipment Search Tool it cannot
find any camera IP address. Shows a blank window like below.
This is usually because camera doesn’t get an IP in same network segment as the computer. Please
follow below steps to fix the problem.
1. Make sure both camera and computer are connected to same router.
2. Make sure camera’s connected to router properly and camera status is normal.
For indoor pan/tilt cameras, when powered on you will see a red power light and camera will pan/tilt.
And on LAN port you’ll see a blinking orange light and a solid green light.
3. Reset camera to have a check. Just keep pressing rest button on camera with power on for about 30
seconds till it reboot. Reset button is usually on back/bottom of camera, or on the end cords.
4. Try another Ethernet cable or hook into another LAN port on router.
5. Make sure the router DHCP server is enabled and there is no Mac address filter.
Check router’s DHCP list as well, to see if you can find camera’s IP address there.
If yes, please try to log-in the camera directly by manually input the IP address and port (default http
port: for SD camera is 80, for HD camera is 88) of camera into address bar of web browser.
6. Please turn off any virtual machine or multiple connection (use only wired or wireless connection) that
is running on computer.
7. At latest make sure there’s no firewall is blocking Equipment Search Tool or other search tool conflicts
with it.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam R4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam R4 in the language / languages: English as an attachment in your email.

The manual is 5,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info