602510
46
Zoom out
Zoom in
Previous page
1/59
Next page
Wireless N300 High power Router
.
39
Enable UPnP: Check/uncheck to enable/disable the UPnP feature.
OK: Click to complete your settings.
4.5 Static Routing
When there are several routers in the network, you may want to set up static routing. Static routing determines the path of the data in your
network. You can use this feature to allow users on different IP domains to access the Internet via this device. It is not recommended to use this
setting unless you are familiar with static routing. In most cases, dynamic routing is recommended, because this feature allows the router to
detect the physical changes of the network layout automatically. If you want to use static routing, make sure the routers DHCP function is
disabled.
Destination Network IP Address: Specify a single IP address, say, 172.17.0.100, or an IP net segment, .say, 192.168.88.0.
Subnet Mask: Specify a Subnet Mask that corresponds to the specified destination IP.
Gateway: Specify the IP address for next hop.
OK: Click to activate your settings.
Note:
Gateway must be on the same IP net segment as device's LAN/WAN IP address.
Subnet Mask must be entered 255.255.255.255 if destination IP address is a host.
Subnet Mask must be entered accordingly if destination IP address represents an IP network segment. It must correspond to the specified IP
address. For example, for IP address of 10.0.0.0, you may enter a subnet mask of 255.0.0.0.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FR305 - N300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FR305 - N300 in the language / languages: English as an attachment in your email.

The manual is 5,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info