679401
58
Zoom out
Zoom in
Previous page
1/90
Next page
NVR User Manual
www.foscam.com
52
Step2 Configure the network parameter.
Parameter
Description
Network Type
You can select the network type from the drop-down list box.
If select the DHCP, the NVR system will automatically obtain an IP
address and other network settings from that server.
If select the Static IP, you can configure an IP address and other
network settings.
HTTP Port
The default value is 88.
HTTPS Port
The default value is 443.
IP Address
You can configure the IP address of the NVR system.
Note:
The IP of IP cameras, PC and NVR should be in the same network segment
and in the same LAN.
Subnet Mask
The subnet mask of the NVR system.
Gateway
The gateway of the NVR system.
Primary DNS
Server
The primary DNS server of the NVR system.
Alternative DNS
Server
The secondary DNS server of the NVR system.
UPNP
You can use the UPnP function to enable the fast connection of the device
to the WAN via a router without port mapping.
Note:
If you want to enable the UPnP function of the NVR, you must enable the
UPnP function of the router to which your NVR is connected.
How to configure the IP Address, Subnet Mask, Gateway, Primary DNS Server, Secondary DNS
Server, please refer to 4.2 Common Operations 2. Configure the IP Parameters.
Step3
Click Save button to take effect.
-------End
Email
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FN7108E-B8-2T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FN7108E-B8-2T in the language / languages: English as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info