602513
109
Zoom out
Zoom in
Previous page
1/116
Next page
NVR User Manual
www.foscam.com
108
5.5 FAQ
1. No image displayed on the monitor after starting up normally.
Verify the device is connected with the monitor via HDMI or VGA cable.
Verify the connection cable is good.
Verify Input mode of the monitor is correct.
Please check the input mode of the monitor matches with the output mode of the device (e.g. if the
output mode of NVR is HDMI output, then the input mode of monitor must be the HDMI input). And
if not, please modify the input mode of monitor.
2. No record file found in the NVR local HDD, and prompt “No record file found”.
Verify the system time setting is correct.
Choose “Menu > Settings > General in the GUI interface, and verify the time is correct.
Verify the search condition is correct.
Choose “Menu > Playback in the GUI interface, and verify the channel and time are correct.
Verify the HDD status is normal.
Choose “Menu > About > HDD Info” in the GUI interface, view the HDD status.
3. Why recording is not performed after motion detection is enabled?
On the “Motion Detection” page, check whether the following are correctly set:
Check whether the motion detection channel is correct.
Check whether a trigger time segment is set.
Check whether a detection area is set.
Check whether recording is selected.
4. Why doesn’t the monitor respond when I operate the remote control?
Check the battery of the remote control (positive and negative poles or battery level).
Check whether the remote control is aligned with the middle position of the front panel of the NVR.
Check whether you use the remote control correctly.
Check whether the remote control is interfered by fluorescent lights around.
5. Why can the NVR search the IPC but cannot connect the IPC?
On the “IPC management” page, check whether the following are correctly set:
Check whether the user name and password for the IPC are correct.
Check whether the web page port for the IPC is correct.
Check whether the IPC also supports the protocol selected in the NVR.
6. The screen of the display is incomplete.
Confirm the current resolution and check the resolution supported by the display. If the resolution is
1920*1080, the display needs to support the resolution 1920*1080.
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FN3104H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FN3104H in the language / languages: English as an attachment in your email.

The manual is 5,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info