There are some alarm indicators:
A Camera Sound and PC Sound
If you select Camera Sound and the audio output device is connected to the IP camera, you will hear the alarm
when the motion has been detected.
if you select PC Sound and the audio output device is connected to the PC, you will hear the alarm when the
motion has been detected.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first.
C Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as
a still picture and load it to the FTP or SD card.
Make sure you have set the storage path in Video > Snapshot Settings panel.
Time interval: The interval time between two pictures.
D Recording
If you select this checkbox, when the motion has been detected, the camera will record automatically and store
the record files.
Make sure you have set the Alarm record files storage path, please go to Record > Storage location page to
verify this settings.The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record >
Alarm Record page and change the alarm time settings.
