516812

Foscam FI8910W Manual

43
Zoom out
Zoom in
Previous page
1/48
Next page
WWW.FOSCAM.COM FI8910W User Manual
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
41
4 APPENDIX
4.1 Frequently Asked Questions
NOTE: Always verify network connections are working by checking the status of the indicators
on the network server, hub and network card.
4.1.1 I have forgoten the administrator username and/or password
To reset the administrator username and password, press and hold down the RESET BUTTON
for 15 seconds. Upon releasing the reset button, the username and password will return to the
factory default administrator username and password. Please power on the camera before reset
Default administrator username: admin
Default administrator password: No password
4.1.2 Subnet doesn’t match, dbclick to change
If the IP Camera Tool shows the error “Subnet doesn’t match, dbclick to change!”, select Obtain
IP from DHCP server. (Figure 2.4)
If this error still exists after obtaining an IP from the DHCP server, check the local area
connection of your computer and verify the subnet and gateway of the camera which should be
the same subnet of your computer. (Figure 2.5)
4.1.3 No Pictures Problems
Video streaming is managed by the ActiveX controller. If the ActiveX controller isn’t installed
correctly you will see no video image. There are two ways to resolve this problem:
1) Reinstall “IP Camera Tool” and ActiveX controller（recommended）. (Figure 2.10~Figure 2.12)
2) Download ActiveX controller and set the security setting of IE: IE browserÆToolÆInternet
ProperÆSecurityÆCustom LevelÆActiveX control and Plug-ins. The first three options of front
should be set to be “Enable”, The ActiveX programs read by the computer will be stored. As
follows:
Enable: Download unsigned ActiveX controls
Enable: Initialise and script ActiveX controls not marked as safe
Enable: Run ActiveX controls and plug-ins
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FI8910W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FI8910W in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Foscam FI8910W

Foscam FI8910W User Manual - German - 15 pages

Foscam FI8910W Quick start guide - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info