548566
11
Zoom out
Zoom in
Previous page
1/29
Next page
IPCAM User Manual
- 9 -
Resolution:VGA640 X 480/ QVGA(320 X 240)
Work mode:50Hz/60Hz/Outdoor
Color parametar:click or can adjust the brightness and contrast
Image PTZ function:Image PTZ function is recommended,you can control the camera direction on
the video image.Double click the right mouse on the image to enable PTZ and you can see a
pea-green arrow on the video image, click left mouse to control direction.if want to cancel,
double click right mouse again.
2.5 For Administrator
When you login as administrator, For Administrator is enabled.
Device Info:You can find the information about Device ID,Firmware Version and Embeded Web UI
Version.
Alias Settings: You can Input the new name as you like.
Data&Time Settings: Data&Time Settings page.
Users Settings: Eight accounts are acceptable for this system. Here the eight users can configure
their user names and password as Administrator, Operator or Visitor.
Figure 2.9
Visitor: In this mode,you can only view.
Operator:You can control the direction of IP Camera and set some parameter.
Administrator:You can setup the advanced configurations of the IP Camera.
Set Record Path:Click Browse to choose the record path.
Set AlarmRecord Path: Click Browse to choose the alarm record path.
the both default path is C:\Documents and Settings\All Users\Documents.
Note: In Windows Vista, there are two points need to notice:
1) Vista's Security level is higher than Windows XP/2000.For "set record path" function, user
should add the Device IP address to the IE's 'Trusted sites' first.
The 'Trusted sites' path: IE browser->Tool->Internet Proper->Security->Trusted
sites->Sites->Add".In Vista,there is a prompt to add Trusted sites when user set
record/Alarmrecord path.
2) In Vista, Cant't Set Windows System Root Directory as the Record/AlarmRecord Path.
These prompts only pop-up in Vista.
UpnP Settings:If you access IP Camera,to be make sure UpnP Status is Succeed.
Upgrade Device Firmware:Upgrade Device Firmware and device embeded web UI sofeware in this
page.
Restore Factory Settings: Restore factory settings of the device.
Reboot Device:Reboot the device.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FI8909 NA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FI8909 NA in the language / languages: French as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Foscam FI8909 NA

Foscam FI8909 NA User Manual - English - 30 pages

Foscam FI8909 NA Quick start guide - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info