595735
32
Zoom out
Zoom in
Previous page
1/36
Next page
IPCAM User Manual
Figure 3.32
3.4.16 Back
Here if you choose back, you will go back to video window.
4 APPENDIX
4.1 Frequently Asked Questions
NOTE: Any questions you would meet, please check Network connections firstly. Check the
working status revealed by the indicators on the network server, hub, exchange and network
card. If abnormal, check the network connections.
4.1.1 I have forgotten the administrator username and/or password
To reset the administrator username and password, Press and hold down the RESET BUTTON
for 30 seconds. Release the power button and the username and password will be reset back to
the factory default administrator username and password. Plug the power when doing reset.
Default administrator username: admin
Default administrator password: No password
4.1.2 Subnet doesn’t match,dbclick to change
If IP Camera Tool shows error information “Subnet doesn’t match,dbclick to change!”. Please
choose Obtain IP from DHCP server. Figure 2.4
If it still show this error after obtain IP from DHCP server. Please check local area connection of
your computer, change subnet, gateway of the camera. Keep them in the same subnet of your
computer. Figure 2.5
4.1.3 No Pictures Problems
The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn’t installed
correctly you will see no video image. There are two ways to resolve this problem:
1) Install “IP Camera Tool”, ActiveX controller is installed simultaneityrecommendable. (Figure
2.10~Figure 2.12)
2 Download ActiveX controller and set the safety property of IE in the PC when you view it first
time:
IE browserÆToolÆInternet ProperÆSecurityÆCustom LevelÆActiveX control and Plug-ins.
Three options of front should be set to be “Enable”, The ActiveX programs read by the computer
will be stored. As follows:
Enable: Download unsigned ActiveX controls
Enable: Initialize and script ActiveX controls not marked as safe
- 32 -
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FI8905E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FI8905E in the language / languages: French as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Foscam FI8905E

Foscam FI8905E User Manual - English - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info