516814
27
Zoom out
Zoom in
Previous page
1/48
Next page
WWW.FOSCAM.COM FI8608W User Manual
Set the same subnet
mask and gateway of
your camera with your
PC
There are two DNS servers, you can set the
same for your camera. Same with gateway is
also OK.
Figure 3.6
If you don’t know the DNS server, you can use the same settings as the default Gateway.
HTTP Port number:, The HTTP Port can be used to access the IPCAM on the LAN. Usually, it is
80. You can set any number between 1024 and 49151 too.
After all settings, click Apply. You will see the following picture, click OK, and re-connect the
camera.
Figure 3.7
RTSP port number: Usually, it is 554. You can set any number between 1024 and 49151 too.
Click Apply and the camera will reboot.
Enter rtsp:// IP:RTSP port number/11 or rtsp:// IP:RTSP port number/12 into the VLC, you can
see the real-time preview. WAN IP or LAN IP is OK. If the RTSP port number is 554, you can
directly enter the following url: rtsp:// IP/11 or rtsp://IP/12 . The number “11” shows that you will
use first stream. The number”12” shows that you will use second stream. For example:
Enter rtsp://192.168.11.169/11
in the VLC.
RTSP Permission Checksum
On: Select it and you need to enter the login username and password when you view the
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
25
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FI8608W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FI8608W in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Foscam FI8608W

Foscam FI8608W Installation Guide - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info