679402
5
Zoom out
Zoom in
Previous page
1/46
Next page
WWW.FOSCAM.COM FI8601W User Manual
Figure 1.1
1 Induction IC
2 Infrared LED: 36 IR LEDs
3 LENS: CMOS sensor with fixed focus lens
4 WIFI Antenna: Wireless Antenna
1.3.2 Interface
Figure 1.2
1Power Interface: Connect the external power adapter, request for 12V/2A power.
2485 Cradle head interface: Support the standard 485 cradle head protocol. You can control
cradle head if it has been connected well with the camera.
3Audio output interface: The jack is used to plug external speakers.
4Reset button : Press and hold on the reset button for 10 seconds. Releasing the reset
button, the password will back to the factory default administrator password. The default
administrator password is admin. You must power on the camera before reset.
5LAN: 10/100M adaptive Ethernet interface. Through this interface, IPCAM can be connected
with various network devices, such as hub, router, etc.
6Audio input interface: The jack is used to plug external microphone or linear audio input
signal .The audio input mode is decided by which kind of audio input device you use. You had
better configure it first.( Please see chapter 3.15 about How to configure it)
1.4 Preparations before use
1.4.1 Software installation
1) Put the CD in the CD drive of your computer. Open the CD; find the software per instructions;
2) Double click IPCamSetup.exe and install the software per instruction.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
3
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FI8601W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FI8601W in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info