Figure 1.5
This camera supports I/O alarm, you can go to Settings-Alarm - I/O page to configure it.
2 LAN
10/100M adaptive Ethernet interface. Through this interface, IPCAM can be connected with various network
devices, such as hub, router, etc.
3 Reset button
Press and hold on the reset button for 5 seconds. Releasing the reset button, the password will back to the
factory default administrator password. The default administrator user is admin with no password.
4 Power Interface
Connect the external power adapter, request for 12V/2A or 12V/1A power.
5 Audio input interface (Except FI9803EP/ FI9903P)
The jack is used to plug external input device such as sound pick up device directly. Here microphone cannot
directly insert to the interface, it must connect to adapter first.
6 Audio output interface(Except FI9803EP/ FI9903P)
The jack is used to plug external output device such as loud speaker directly. Here microphone cannot directly
insert to the interface, it must connect to adapter first.
7 RS485 Cradle head interface (Except FI9803EP/ FI9903P)
This camera supports the standard 485 cradle head protocol(Pelco-D and Pelco-P). Please configure the
RS485 protocol corresponding information first (go to Settings- PTZ - RS485 Configuration page and do
settings), or else the cradle head may cannot work.
1.5.3 Bottom View
There are up to two labels located at the bottom of the camera, this is an important feature of original Foscam
