516782
21
Zoom out
Zoom in
Previous page
1/29
Next page
IPCAM User Manual
- 19 -
Figure 3.4
Access the IP Camera from the Internet
User can access the IP Camera from the Internet,Enter WAN IP address + port number in the IE to
access IP Camera.For example, Http:// 116.25.51.115:85
Note: Make sure the Port mapping is success.You can do port mapping by two ways:
Enter setting page of the router which ipcamera connect with to enable UPNP function.Enter
ipcamera Upnp Settings to enable UPNP and make sure the state is Upnp success.
If your router has the Virtual Map function.Enter router setting page,add ipcameras IP and
port to the Virtual map list.
3.6 How to use DDNS
When use ADSL, the IP Camera will connect to the Internet through ADSL automatically. For each
ADSL reconnection,ISP will re-assign a new IP address for the IP Camera to facilitate the access.
DDNS(Dynamic Domain Name Server) can map the dynamic IP address of an IP Camera to a fixed
domain name.Therefore,we can access the IP Camera by the fixed domain name whether the IP
address changes or not. The IP address is not necessary when you using the DDNS via the domain
name to find your network.
1) Go to the website which Provides free domain name,register and apply a free domain name. such
as http://www.dyndns.com/(details:4.1.6 ).
2) login the Camera homepage as Administration and enter”DDNS Service Settingspage input the
name, password and Host(details: 2.5.3) .Then click <SUBMIT> and reboot Device.
3) Re-login the Camera homepage and enter”DDNS Service Settingspage to check the DDNS
Status is DynDns Succeed or not.
4) Enter”UPnP Settingspage,the UPnP Status should be UPnP Succeed.If the status is not
Succeed,you may enter Basic Network Settings page to change Http Port (details: 2.5.2). Then
click <SUBMIT> and reboot Device.
5) Re-login the Camera homepage to check and make sure the DDNS Status and UPnP Status is
Succeed.
6) You only need to enter the domain name(domain name+Port number http://ipcam.kicks-ass.net:81/)
in the IE address bar ,the browser will visit the IP Camera.
Wait for several minutes and the IP Camera will dial up to access the Internet automatically, and the
communication with the DDNS server is established successfully. In the way, the user can access the
IP Camera from a WAN by using the DDNS domain name.
If the gateway settings and DDNS settings have been completed,ener the DDNS dynamic domain
name(for example,http://ipcam.vicp.net/,do not add www.) in the address bar of the IE to access the IP
Camera.If multiple IP Cameras are connected to the same router,enter DDNS dynamic domain + port
number(for example, http://ipcam.vicp.net:85/) in the address bar of the IE to access different IP
Cameras.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FI 8908 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FI 8908 in the language / languages: French as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Foscam FI 8908

Foscam FI 8908 Installation Guide - Dutch - 15 pages

Foscam FI 8908 User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info