516782
8
Zoom out
Zoom in
Previous page
1/29
Next page
IPCAM User Manual
- 6 -
Figure 2.4
DHCP checkbox:if checked, the device will obtain IP from DHCP server (To be make sure the Router
which the device connect with has DHCP function).
IP address: Fill in the IP address assigned and make sure it is in the same subnet as the gateway.(i.e.
the first three sections are the same)
Mask: The default subnet mask of the equipment is: 255.255.255.0
Gateway: Make sure it is in the same subnet with PC IP address. Default Gateway address is
192.168.0.1
DNS: IP address of IPS network provider.
Port: LAN port assigned for the equipment, usually 80
User & Password : Default administrator username/password: admin/No password
Enable Using Dhcp the system will assign a reasonable IP address for your equipment only if your
gateway supports DHCP (It is the case with most gateways).
NOTE: when the promptubnet doesnt match,dbclick to change!ppeared,please set the IP Camera
IP address once again.
Upgrade Firmware
Enter the correct User and Password to upgrade system Firmware and Web UI.
Figure 2.5
Refresh Camera List
Refresh camera list manually.
Flush Arp Buffer
When cable network and wireless network of the device both are fixed IP address. There is a a
problem you may encounter is can search the camera IP but cant open the camera web page.you
may try to use flush arp buffer.
2.2 Camera Login
You can access the camera through IP Camera Tool or IE directly.
1) Double click the IP address of the IP Camera listed(Figure 2.1).IE will be opened automatically and
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FI 8908 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FI 8908 in the language / languages: French as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Foscam FI 8908

Foscam FI 8908 Installation Guide - Dutch - 15 pages

Foscam FI 8908 User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info