WARNINGS
Do not carry out any tire repairs on a
spare wheel.
Do not drive through an automatic
car wash.
If you are unsure what type of spare
wheel you have do not exceed
50 mph (80 km/h).
Only fit snow chains to specified
tires. See Technical Specifications
(page 178).
The ground clearance of your vehicle
may be reduced. Take care when
parking next to a curb.
Note: Your vehicle may exhibit some
unusual driving characteristics.
Vehicle Jack
WARNINGS
The vehicle jack supplied with your
vehicle should only be used when
changing a wheel in emergency
situations.
Before using the vehicle jack, check
that it is not damaged or deformed
and that the thread is lubricated and
free from foreign matter.
WARNINGS
Never place anything between the
jack and the ground, or the jack and
your vehicle.
Note: Vehicles with a temporary mobility
kit do not have a vehicle jack or a wheel
brace.
It is recommended to use a workshop type
hydraulic jack for changing between
summer and winter tires.
Note: Use a jack with a minimum lifting
capacity of 1.5 ton and a lifting plate with a
minimum diameter of about 3 in (80 mm).
Vehicles With a Spare Wheel
Your vehicle jack, wheel brace, screw-in
towing eye and wheel trim remover are
located in the spare wheel well.
Jacking and Lifting Points
WARNING
Use only the specified jacking points.
If you use other positions, you may
damage the body, steering,
suspension, engine, braking system or the
fuel lines.
174
B-MAX (CB2) Vehicles Built From: 10-03-2014 Vehicles Built Up To: 03-05-2015, CG3573en enGBR, Edition date: 02/2014, Third Printing
Wheels and Tires